Sharp LC-37HV4M Viewing an image from a PC, Connecting a PC, Displaying an image from a PC

Page 46

Using external equipment

Viewing an image from a PC

Connecting a PC

Use the PC terminals to connect a PC.

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 67 for a list of PC signals compatible with the System.

AVC System (front view)

RGB cable (commercially available)

ø 3.5 mm stereo minijack cable	PC
(commercially available)
(commercially available)

Signal names for 15-pin mini D-sub connecter

5 4 3 2 1

10	9	8	7	6
15	14	13	12	11

Pin No.	Signal name	Pin No.	Signal name	Pin No.	Signal name
1	R	6	GND (Ground)	q	Not connected
2	G	7	GND (Ground)	w	SDA
3	B	8	GND (Ground)	e	HD
4	Not connected	9	+5V	r	VD
5	CSYNC	0	GND (Ground)	t	SCL

NOTE

•Macintosh adaptor may be required for use for some Macintosh computers.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

Displaying an image from a PC

To view an image from a PC, select “PC” from the “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display.

When connecting to a PC, the correct input signal type is automatically detected. (See page 55.) If the PC image does not come in clearly, you may need to set the Auto Sync. adjustment in the “Setup” menu. (See page 50.)

NOTE

•Each time bis pressed, the input source toggles.

45

Image 46

Contents LC-37HV4M Contents LC-37HV4MImportant Safety Precautions Dear Sharp customerImportant Safety Precautions Precautions when transporting the DisplaySupplied accessories Attaching the speakers PreparationExample Attaching right speaker Preparation How to secure from overturningSecuring from overturning Secure the stand on a platform or the floorWhere to place the System Setting the System in placeRemoving the terminal cover Setting the SystemConnecting the system cable and the AC cord to the Display AVC System rear viewCable clamp Small Closing the terminal coverCable clamp Large Cables come out from the small openingUsing an optional bracket to mount the Display Setting the Display on the wallSetting the AVC System with the stand Hanging on the wallUsing the remote control unit Inserting the batteriesPart names DisplayAVC System Part namesRemote control unit Watching TV Connecting to an antennaConnecting to the power outlet Basic connectionTurning off the power Turning on the powerWatching TV Using 0 9 on the remote control unit Using Flashback a on the remote control unitUsing CHa/bon the remote control unit Simple button operations for changing channelsUsing eon the remote control unit Simple button operation for changing volume/soundChanging the volume MuteWatching TV Using hon the remote control unit SRS sound optionsWatching TV Using Sound on the remote control unit PC input mode menu items Basic adjustment settingsAV input mode menu items List of AV menu items to help you with operationsPress a/bto select Password, and then press Enter Auto installationBasic adjustment settings Press c/dto select Yes, and then pressAutomatic channel labelling Automatic channel searchingAutomatic channel sorting Auto search Programme setupPress a/b to select Programme Setup, and then press Enter Press a/bto select Auto Search, and then press EnterPress a/b to select Manual Adjust, Basic adjustment settings Manual setting for each channelProgramme Setup Manual menu Then press EnterSearch tuning Fine tuningColour system menu Colour systemLabelling channels Labelling menuSkip menu Setting the child lockSkipping channels Lock menuPress a/ b to select Programme Setup Basic adjustment settings SortSort menus AV Input mode Language setting for on-screen displayPC Input mode Press a/bto select Language, and then press EnterRed Picture adjustmentsSelected item Cbutton Dbutton Contrast GreenPress a/b to select C.M.S., and then press Enter Basic adjustment settings S. Colour Management SystemPress a/bto select Advanced, and then press Enter Press a/bto select C.M.S., and then pressPress a/bto select Black, and then press Basic adjustment settings Colour temperature BlackPress a/bto select Colour Temp, and then press Enter Press a/bto select the desired level, and then press EnterBasic adjustment settings Monochrome Film modeDNR Digital Noise Reduction Basic adjustment settings SettingPress a/ bto select I/P Setting, and then Press a/bto select DNR, and then pressSound adjustment Audio adjustmentSurround Power control for AV source Power ControlPower save Press c/d to select Enable, and then Press Enter No signal OffPress a/b to select No Signal Off, and then press Enter No operation OffPress a/bto select Power Management, and then press Enter Basic adjustment settings Power Control for PC sourcePower management Press Menu and the PC Menu screen displaysUsing external equipment AVC System front viewFor INPUT1 signal DVD player Using external equipmentConnecting a DVD player Watching a DVD imageWatching a VCR image Connecting a VCRFor INPUT2 signal Displaying a VCR imageWatching broadcasts via an Hdtv tuner Connecting an Hdtv tunerFor INPUT3 signal Displaying broadcasts via an Hdtv tunerEnjoying a game console and viewing camcorder images Connecting a game console or camcorderDisplaying an image of the game console or camcorder Viewing an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connecter Displaying an image from a PCHow to connect the speaker cable Connecting external speakersWhen using external speakers Make sure to connect the speaker jack and cableUsing external equipment Selecting speakers Press a/b to select Speaker, and then press EnterImage position AV input mode only Useful adjustment settingsDescription Useful adjustment settings Moving the picture on the screenFor automatically adjusting the PC image Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only PhaseInput signal setting Input signal sourceInput selection Signal system of your equipment, and then Colour system setting AV input mode onlyAV mode selection Press a/b to select Colour System, and then press EnterManual Selection Wide mode for AV input modeAuto Selection Wide mode for PC input mode Press a/bto select the desired input signal on the display Input signal PC input mode onlyPress a/bto select Input Signal and then press Enter ExampleWSS signal 43 screen Mode Normal Wide screen signalling WSS AV input mode onlyPicture aspect ratio AV input mode only Press a/bto select WSS, and then pressRotate AV input modePC input mode You can set the orientation of the picturePress a/bto select Audio Out, and then press Enter Sleep timerAudio out Press c/d to select Fixed or Variable, and then press EnterCool climate Press a/bto select Cool Climate, and then press EnterSetting a password Password setting for child lock TV mode onlyClearing the password Dual screen functions Useful featuresDual screen Update the still image by pressing Enter Teletext language settingUseful features Picture and still image Press d to exit still imageTeletext mode Useful featuresWhat is Teletext? Teletext functionTOP Overview screen Useful features Displaying SubpagesDisplaying TOP Overview Subpage screenUseful features Time display Problem Possible Solution TroubleshootingAppendix 640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz PC compatibility chartAppendix 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 HzRS-232C port specifications PC Control of the SystemCommands Response code format37oLCD Colour TV, ModelLC-37HV4M SpecificationsOptional accessories Part name Part numberDimensional drawings DisplayDimensional drawings HOW to SET the Factory Presets Press a/bto select Auto Installation Press EnterSharp Corporation