Sharp LC-37HV4M operation manual Where to place the System, Setting the System in place

Page 8

Preparation

Where to place the System

“System” means the Display and AVC System. First select the location where to place the System.

1

Selecting the location of the System

• Select a place with no direct sunlight and good ventilation.

• The Display and the AVC System are connected by the system cable. (See page 8 for details.)

 

System cable

 

If you want to keep a longer distance between the AVC System

Display

Display and AVC System, please purchase the

 

optional system cable AN-07SC1 (about 7 meters).

 

(See page 70.)

2 Setting the System in place

Handling the Display

CAUTION

• The Display is very heavy. Move it with two or more people.

• Do not remove the stand from the Display unless using an optional bracket to mount it.

• When moving, put your hands on the Display, but never on the Display speakers.

• Keep enough space above and behind the Display.

Handling the AVC System

CAUTION

CAUTION

Adjust the screen with both

• Do not put a VCR or other device on the AVC System.

hands. Put one hand on the

Display and tilt the screen

• Keep enough space above and on the sides of the AVC System.

while steadying the stand

• Do not block the ventilation openings on the top and left side,

with your other hand.

You can adjust the screen

and the exhaust fan on the right side.

vertically up to 4 degrees

• Do not spread a thick cloth beneath the AVC System, or cover it

forward or 6 degrees back-

with one, as this can cause overheating and result in malfunction.

ward, or rotate 10 degrees

 

horizontally.

10 cm

 

or more

 

Keep enough space

 

5 cm or more

 

5 cm or more

on both sides

 

There is an exhaust fan

 

on the right side.

 

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents LC-37HV4M Contents LC-37HV4MImportant Safety Precautions Dear Sharp customerImportant Safety Precautions Precautions when transporting the DisplaySupplied accessories Example Attaching right speaker PreparationAttaching the speakers How to secure from overturning Securing from overturningPreparation Secure the stand on a platform or the floorWhere to place the System Setting the System in placeSetting the System Connecting the system cable and the AC cord to the DisplayRemoving the terminal cover AVC System rear viewClosing the terminal cover Cable clamp LargeCable clamp Small Cables come out from the small openingSetting the Display on the wall Setting the AVC System with the standUsing an optional bracket to mount the Display Hanging on the wallUsing the remote control unit Inserting the batteriesPart names DisplayAVC System Part namesRemote control unit Connecting to an antenna Connecting to the power outletWatching TV Basic connectionWatching TV Turning on the powerTurning off the power Using Flashback a on the remote control unit Using CHa/bon the remote control unitUsing 0 9 on the remote control unit Simple button operations for changing channelsSimple button operation for changing volume/sound Changing the volumeUsing eon the remote control unit MuteWatching TV Using hon the remote control unit SRS sound optionsWatching TV Using Sound on the remote control unit Basic adjustment settings AV input mode menu itemsPC input mode menu items List of AV menu items to help you with operationsAuto installation Basic adjustment settingsPress a/bto select Password, and then press Enter Press c/dto select Yes, and then pressAutomatic channel sorting Automatic channel searchingAutomatic channel labelling Programme setup Press a/b to select Programme Setup, and then press EnterAuto search Press a/bto select Auto Search, and then press EnterBasic adjustment settings Manual setting for each channel Programme Setup Manual menuPress a/b to select Manual Adjust, Then press EnterSearch tuning Fine tuningColour system Labelling channelsColour system menu Labelling menuSetting the child lock Skipping channelsSkip menu Lock menuSort menus Basic adjustment settings SortPress a/ b to select Programme Setup Language setting for on-screen display PC Input modeAV Input mode Press a/bto select Language, and then press EnterPicture adjustments Selected item Cbutton Dbutton ContrastRed GreenBasic adjustment settings S. Colour Management System Press a/bto select Advanced, and then press EnterPress a/b to select C.M.S., and then press Enter Press a/bto select C.M.S., and then pressBasic adjustment settings Colour temperature Black Press a/bto select Colour Temp, and then press EnterPress a/bto select Black, and then press Press a/bto select the desired level, and then press EnterBasic adjustment settings Monochrome Film modeBasic adjustment settings Setting Press a/ bto select I/P Setting, and thenDNR Digital Noise Reduction Press a/bto select DNR, and then pressSurround Audio adjustmentSound adjustment Power save Power ControlPower control for AV source No signal Off Press a/b to select No Signal Off, and then press EnterPress c/d to select Enable, and then Press Enter No operation OffBasic adjustment settings Power Control for PC source Power managementPress a/bto select Power Management, and then press Enter Press Menu and the PC Menu screen displaysUsing external equipment AVC System front viewUsing external equipment Connecting a DVD playerFor INPUT1 signal DVD player Watching a DVD imageConnecting a VCR For INPUT2 signalWatching a VCR image Displaying a VCR imageConnecting an Hdtv tuner For INPUT3 signalWatching broadcasts via an Hdtv tuner Displaying broadcasts via an Hdtv tunerDisplaying an image of the game console or camcorder Connecting a game console or camcorderEnjoying a game console and viewing camcorder images Connecting a PC Signal names for 15-pin mini D-sub connecterViewing an image from a PC Displaying an image from a PCConnecting external speakers When using external speakersHow to connect the speaker cable Make sure to connect the speaker jack and cableUsing external equipment Selecting speakers Press a/b to select Speaker, and then press EnterDescription Useful adjustment settingsImage position AV input mode only Useful adjustment settings Moving the picture on the screenAuto Sync. adjustment PC input mode only Fine Sync. adjustment PC input mode onlyFor automatically adjusting the PC image PhaseInput selection Input signal sourceInput signal setting Colour system setting AV input mode only AV mode selectionSignal system of your equipment, and then Press a/b to select Colour System, and then press EnterAuto Selection Wide mode for AV input modeManual Selection Wide mode for PC input mode Input signal PC input mode only Press a/bto select Input Signal and then press EnterPress a/bto select the desired input signal on the display ExampleWide screen signalling WSS AV input mode only Picture aspect ratio AV input mode onlyWSS signal 43 screen Mode Normal Press a/bto select WSS, and then pressAV input mode PC input modeRotate You can set the orientation of the pictureSleep timer Audio outPress a/bto select Audio Out, and then press Enter Press c/d to select Fixed or Variable, and then press EnterCool climate Press a/bto select Cool Climate, and then press EnterClearing the password Password setting for child lock TV mode onlySetting a password Dual screen Useful featuresDual screen functions Teletext language setting Useful features Picture and still imageUpdate the still image by pressing Enter Press d to exit still imageUseful features What is Teletext?Teletext mode Teletext functionUseful features Displaying Subpages Displaying TOP OverviewTOP Overview screen Subpage screenUseful features Time display Appendix TroubleshootingProblem Possible Solution PC compatibility chart Appendix640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 HzRS-232C port specifications PC Control of the SystemCommands Response code formatSpecifications Optional accessories37oLCD Colour TV, ModelLC-37HV4M Part name Part numberDimensional drawings DisplayDimensional drawings HOW to SET the Factory Presets Press a/bto select Auto Installation Press EnterSharp Corporation
Top Page Image Contents