Sharp LC-30HV4M operation manual Inserting the batteries, Using the remote control unit

Page 10

Preparation

Inserting the batteries

Before using the System for the first time, insert two LR6 (“AA” size) Alkaline batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new LR6 (“AA” size) Alkaline batteries.

1 Open the battery cover.	2 Insert two supplied LR6 (“AA” size) 3 Close the battery cover.
	Alkaline batteries.

+

__

+

•Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•Do not use manganese batteries. When you replace the batteries, use alkaline ones.

•Place the batteries with their terminals corresponding to the (e) and (f) indications.

•Do not mix batteries of different types. Different types of batteries have different characteristics.

•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

•Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

•The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

Using the remote control unit

Use the remote control unit by pointing it towards the remote sensor window. Objects between the remote control unit and sensor window may prevent proper operation.

Cautions regarding remote control unit

•Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•Do not install or place the remote control unit under direct sunlight.

The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote sensor window of the Display is under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display, or operate the remote control unit closer to the remote sensor window.

9

Image 10

Contents LC-30HV4M Contents LC-30HV4MImportant Safety Precautions Dear Sharp customerImportant Safety Precautions Precautions when transporting the DisplaySupplied accessories Setting the System in place Where to place the SystemPreparation Preparation Setting the SystemConnecting the system cable and the AC cord to the Display Removing the terminal coverDisplay rear view Closing the terminal coverCables come out from the small opening Using an optional bracket to mount the Display Setting the Display on the wallSetting the AVC System with the stand Hanging on the wallUsing the remote control unit Inserting the batteriesPart names DisplayAVC System Part namesRemote control unit Watching TV Connecting to an antennaConnecting to the power outlet Basic connectionTurning off the power Turning on the powerWatching TV Using 0 9 on the remote control unit Using Flashback a on the remote control unitUsing CHa/bon the remote control unit Simple button operations for changing channelsUsing eon the remote control unit Simple button operation for changing volume/soundChanging the volume MuteWatching TV Using hon the remote control unit SRS sound optionsWatching TV Using Sound on the remote control unit PC input mode menu items Basic adjustment settingsAV input mode menu items List of AV menu items to help you with operationsPress a/bto select Password, and then press Enter Auto installationBasic adjustment settings Press c/dto select Yes, and then pressAutomatic channel labelling Automatic channel searchingAutomatic channel sorting Auto search Programme setupPress a/b to select Programme Setup, and then press Enter Press a/bto select Auto Search, and then press EnterPress a/b to select Manual Adjust, Basic adjustment settings Manual setting for each channelProgramme Setup Manual menu Then press EnterSearch tuning Fine tuningColour system menu Colour systemLabelling channels Labelling menuSkip menu Setting the child lockSkipping channels Lock menuSort menus Basic adjustment settings SortPress a/ b to select Programme Setup Press a/bto select Sort, and then pressAV Input mode Language setting for on-screen displayPC Input mode Press a/bto select Language, and then press EnterRed Picture adjustmentsSelected item Cbutton Dbutton Contrast GreenPress a/b to select C.M.S., and then press Enter Basic adjustment settings S. Colour Management SystemPress a/bto select Advanced, and then press Enter Press a/bto select C.M.S., and then pressPress a/bto select Black, and then press Basic adjustment settings Colour temperature BlackPress a/bto select Colour Temp, and then press Enter Press a/bto select the desired level, and then press EnterBasic adjustment settings Monochrome Film modeDNR Digital Noise Reduction Basic adjustment settings SettingPress a/ bto select I/P Setting, and then Press a/bto select DNR, and then pressSurround Audio adjustmentSound adjustment Press a/b to select Surround, and then press EnterPower Control for AV source Power ControlPower save Press c/d to select Enable, and then Press Enter No Signal OffPress a/b to select No Signal Off, and then press Enter No Operation OffBasic adjustment settings Power Control for PC source Power managementUsing external equipment AVC System front viewFor INPUT1 signal DVD player Using external equipmentConnecting a DVD player Watching a DVD imageWatching a VCR image Connecting a VCRFor INPUT2 signal Displaying a VCR imageWatching broadcasts via an Hdtv tuner Connecting an Hdtv tunerFor INPUT3 signal Displaying broadcasts via an Hdtv tunerEnjoying a game console and viewing camcorder images Connecting a game console or camcorderDisplaying an image of the game console or camcorder Viewing an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connecter Displaying an image from a PCRemoving the speakers This unit has detachable type speakers Before attaching/detaching speakersImage position AV input mode only Useful adjustment settingsDescription Useful adjustment settings Moving the picture on the screenFor automatically adjusting the PC image Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only PhaseInput signal setting Input signal sourceInput selection Signal system of your equipment, and then Colour system setting AV input mode onlyAV mode selection Press a/b to select Colour System, and then press EnterManual Selection Wide mode for AV input modeAuto Selection Wide mode for PC input mode Press a/bto select the desired input signal on the display Input signal PC input mode onlyPress a/bto select Input Signal and then press Enter ExampleWSS signal 43 screen Mode Normal Wide screen signalling WSS AV input mode onlyPicture aspect ratio AV input mode only Press a/bto select WSS, and then pressFull mode Mode2 Selecting Full Mode display AV input mode onlyFull Mode screen Full mode Mode1 Press a/bto select Full Mode, and then press EnterPC input mode AV input modeRotate Press a/bto select Audio Out, and then press Enter Sleep timerAudio out Press c/d to select Fixed or Variable, and then press EnterCool climate Press a/bto select Cool Climate, and then press EnterClearing the password Password setting for child lock TV mode onlySetting a password Enter the 4-digit number as a password usingDual screen functions Useful featuresDual screen Update the still image by pressing Enter Teletext language settingUseful features Picture and still image Press d to exit still imageTeletext mode Useful featuresWhat is Teletext? Teletext functionTOP Overview screen Useful features Displaying SubpagesDisplaying TOP Overview Subpage screenUseful features Time display Problem Possible Solution TroubleshootingAppendix 640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz PC compatibility chartAppendix 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 HzRS-232C port specifications PC Control of the SystemCommands Response code format30oLCD Colour TV, ModelLC-30HV4M SpecificationsOptional accessory Part name Part number Wall mount bracket AN-37AG1Dimensional drawings Dimensional drawings HOW to SET the Factory Presets Press a/bto select Auto Installation Press EnterSharp Corporation