Sharp LC-30HV4M Preparation, Where to place the System, Setting the System in place

Page 6

Preparation

Where to place the System

“System” means the Display and AVC System. First select the location where to place the System.

1

Selecting the location of the System

• Select a place with no direct sunlight and good ventilation.

• The Display and the AVC System are connected by the system cable. (See page 6 for details.)

System cable

AVC System

Display

2 Setting the System in place

Handling the Display

CAUTION

• Do not remove the stand from the Display unless using an optional bracket to mount it.

• When moving, put your hands on the Display, but never on the Display speakers.

• Keep enough space above and behind the Display.

Handling the AVC System

CAUTION

CAUTION

• Do not put a VCR or other device on the AVC System.

Adjust the screen with both

• Keep enough space above and on the sides of the AVC System.

hands. Put one hand on the

Display and tilt the screen

• Do not block the ventilation openings on the top and left side,

while steadying the stand

and the exhaust fan on the right side.

with your other hand.

• Do not spread a thick cloth beneath the AVC System, or cover it

You can adjust the screen

vertically up to 10 degrees

with one, as this can cause overheating and result in

forward or 8 degrees back-

malfunction.

ward, or rotate 10 degrees

 

 

horizontally.

10 cm

 

or more

 

Keep enough space

 

5 cm or more

 

5 cm or more

on both sides

 

There is an exhaust fan

 

on the right side.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LC-30HV4M Contents LC-30HV4MImportant Safety Precautions Dear Sharp customerImportant Safety Precautions Precautions when transporting the DisplaySupplied accessories Where to place the System Setting the System in placePreparation Preparation Setting the SystemConnecting the system cable and the AC cord to the Display Removing the terminal coverClosing the terminal cover Display rear viewCables come out from the small opening Using an optional bracket to mount the Display Setting the Display on the wallSetting the AVC System with the stand Hanging on the wallUsing the remote control unit Inserting the batteriesPart names DisplayAVC System Part namesRemote control unit Watching TV Connecting to an antennaConnecting to the power outlet Basic connectionTurning on the power Turning off the powerWatching TV Using 0 9 on the remote control unit Using Flashback a on the remote control unitUsing CHa/bon the remote control unit Simple button operations for changing channelsUsing eon the remote control unit Simple button operation for changing volume/soundChanging the volume MuteWatching TV Using hon the remote control unit SRS sound optionsWatching TV Using Sound on the remote control unit PC input mode menu items Basic adjustment settingsAV input mode menu items List of AV menu items to help you with operationsPress a/bto select Password, and then press Enter Auto installationBasic adjustment settings Press c/dto select Yes, and then pressAutomatic channel searching Automatic channel labellingAutomatic channel sorting Auto search Programme setupPress a/b to select Programme Setup, and then press Enter Press a/bto select Auto Search, and then press EnterPress a/b to select Manual Adjust, Basic adjustment settings Manual setting for each channelProgramme Setup Manual menu Then press EnterSearch tuning Fine tuningColour system menu Colour systemLabelling channels Labelling menuSkip menu Setting the child lockSkipping channels Lock menuSort menus Basic adjustment settings SortPress a/ b to select Programme Setup Press a/bto select Sort, and then pressAV Input mode Language setting for on-screen displayPC Input mode Press a/bto select Language, and then press EnterRed Picture adjustmentsSelected item Cbutton Dbutton Contrast GreenPress a/b to select C.M.S., and then press Enter Basic adjustment settings S. Colour Management SystemPress a/bto select Advanced, and then press Enter Press a/bto select C.M.S., and then pressPress a/bto select Black, and then press Basic adjustment settings Colour temperature BlackPress a/bto select Colour Temp, and then press Enter Press a/bto select the desired level, and then press EnterBasic adjustment settings Monochrome Film modeDNR Digital Noise Reduction Basic adjustment settings SettingPress a/ bto select I/P Setting, and then Press a/bto select DNR, and then pressSurround Audio adjustmentSound adjustment Press a/b to select Surround, and then press EnterPower Control Power Control for AV sourcePower save Press c/d to select Enable, and then Press Enter No Signal OffPress a/b to select No Signal Off, and then press Enter No Operation OffBasic adjustment settings Power Control for PC source Power managementUsing external equipment AVC System front viewFor INPUT1 signal DVD player Using external equipmentConnecting a DVD player Watching a DVD imageWatching a VCR image Connecting a VCRFor INPUT2 signal Displaying a VCR imageWatching broadcasts via an Hdtv tuner Connecting an Hdtv tunerFor INPUT3 signal Displaying broadcasts via an Hdtv tunerConnecting a game console or camcorder Enjoying a game console and viewing camcorder imagesDisplaying an image of the game console or camcorder Viewing an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connecter Displaying an image from a PCRemoving the speakers This unit has detachable type speakers Before attaching/detaching speakersUseful adjustment settings Image position AV input mode onlyDescription Useful adjustment settings Moving the picture on the screenFor automatically adjusting the PC image Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only PhaseInput signal source Input signal settingInput selection Signal system of your equipment, and then Colour system setting AV input mode onlyAV mode selection Press a/b to select Colour System, and then press EnterWide mode for AV input mode Manual SelectionAuto Selection Wide mode for PC input mode Press a/bto select the desired input signal on the display Input signal PC input mode onlyPress a/bto select Input Signal and then press Enter ExampleWSS signal 43 screen Mode Normal Wide screen signalling WSS AV input mode onlyPicture aspect ratio AV input mode only Press a/bto select WSS, and then pressFull mode Mode2 Selecting Full Mode display AV input mode onlyFull Mode screen Full mode Mode1 Press a/bto select Full Mode, and then press EnterAV input mode PC input modeRotate Press a/bto select Audio Out, and then press Enter Sleep timerAudio out Press c/d to select Fixed or Variable, and then press EnterCool climate Press a/bto select Cool Climate, and then press EnterClearing the password Password setting for child lock TV mode onlySetting a password Enter the 4-digit number as a password usingUseful features Dual screen functionsDual screen Update the still image by pressing Enter Teletext language settingUseful features Picture and still image Press d to exit still imageTeletext mode Useful featuresWhat is Teletext? Teletext functionTOP Overview screen Useful features Displaying SubpagesDisplaying TOP Overview Subpage screenUseful features Time display Troubleshooting Problem Possible SolutionAppendix 640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz PC compatibility chartAppendix 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 HzRS-232C port specifications PC Control of the SystemCommands Response code format30oLCD Colour TV, ModelLC-30HV4M SpecificationsOptional accessory Part name Part number Wall mount bracket AN-37AG1Dimensional drawings Dimensional drawings HOW to SET the Factory Presets Press a/bto select Auto Installation Press EnterSharp Corporation
Top Page Image Contents