Sharp LC-30HV4M operation manual Removing the speakers This unit has detachable type speakers

Page 45

Using external equipment

Removing the speakers

This unit has detachable type speakers.

You can detach the system speakers when using external amplifier/speakers.

Before detaching (or attaching) speakers, unplug the AC cord from the AC outlet.

Before attaching/detaching speakers

•Before performing work, make sure to turn off the System.

•Before performing work, spread cushioning over a flat surface to lay the Display on. This will prevent it from being damaged.

1

Unfasten the screws used to secure the speakers in place.

CAUTION

2	Speaker
	plug

Take hold of the speaker and slowly slide it sideways.

(The speaker plug is still inserted, so make sure not to pull the speaker too far.)

3

Remove the speaker plug from the terminal on the Display. (Do not remove the plug by pulling the cord.)

Now the speaker can be detached from the Display.

•The speaker terminals on the Display is only for the attached speakers. Do not connect any third party plug or speaker to the terminal.

•Insert the speaker plug completely into the terminal.

•Do not handle or move the Display by the speakers.

NOTE

•Perform the same steps for both left and right speakers.

•To attach the speakers, perform the above steps in reverse order.

44

Image 45

Contents LC-30HV4M LC-30HV4M ContentsDear Sharp customer Important Safety PrecautionsPrecautions when transporting the Display Important Safety PrecautionsSupplied accessories Where to place the System Setting the System in placePreparation Connecting the system cable and the AC cord to the Display Setting the SystemPreparation Removing the terminal coverClosing the terminal cover Display rear viewCables come out from the small opening Setting the AVC System with the stand Setting the Display on the wallUsing an optional bracket to mount the Display Hanging on the wallInserting the batteries Using the remote control unitDisplay Part namesPart names AVC SystemRemote control unit Connecting to the power outlet Connecting to an antennaWatching TV Basic connectionTurning on the power Turning off the powerWatching TV Using CHa/bon the remote control unit Using Flashback a on the remote control unitUsing 0 9 on the remote control unit Simple button operations for changing channelsChanging the volume Simple button operation for changing volume/soundUsing eon the remote control unit MuteSRS sound options Watching TV Using hon the remote control unitWatching TV Using Sound on the remote control unit AV input mode menu items Basic adjustment settingsPC input mode menu items List of AV menu items to help you with operationsBasic adjustment settings Auto installationPress a/bto select Password, and then press Enter Press c/dto select Yes, and then pressAutomatic channel searching Automatic channel labellingAutomatic channel sorting Press a/b to select Programme Setup, and then press Enter Programme setupAuto search Press a/bto select Auto Search, and then press EnterProgramme Setup Manual menu Basic adjustment settings Manual setting for each channelPress a/b to select Manual Adjust, Then press EnterFine tuning Search tuningLabelling channels Colour systemColour system menu Labelling menuSkipping channels Setting the child lockSkip menu Lock menuPress a/ b to select Programme Setup Basic adjustment settings SortSort menus Press a/bto select Sort, and then pressPC Input mode Language setting for on-screen displayAV Input mode Press a/bto select Language, and then press EnterSelected item Cbutton Dbutton Contrast Picture adjustmentsRed GreenPress a/bto select Advanced, and then press Enter Basic adjustment settings S. Colour Management SystemPress a/b to select C.M.S., and then press Enter Press a/bto select C.M.S., and then pressPress a/bto select Colour Temp, and then press Enter Basic adjustment settings Colour temperature BlackPress a/bto select Black, and then press Press a/bto select the desired level, and then press EnterFilm mode Basic adjustment settings MonochromePress a/ bto select I/P Setting, and then Basic adjustment settings SettingDNR Digital Noise Reduction Press a/bto select DNR, and then pressSound adjustment Audio adjustmentSurround Press a/b to select Surround, and then press EnterPower Control Power Control for AV sourcePower save Press a/b to select No Signal Off, and then press Enter No Signal OffPress c/d to select Enable, and then Press Enter No Operation OffPower management Basic adjustment settings Power Control for PC sourceAVC System front view Using external equipmentConnecting a DVD player Using external equipmentFor INPUT1 signal DVD player Watching a DVD imageFor INPUT2 signal Connecting a VCRWatching a VCR image Displaying a VCR imageFor INPUT3 signal Connecting an Hdtv tunerWatching broadcasts via an Hdtv tuner Displaying broadcasts via an Hdtv tunerConnecting a game console or camcorder Enjoying a game console and viewing camcorder imagesDisplaying an image of the game console or camcorder Signal names for 15-pin mini D-sub connecter Connecting a PCViewing an image from a PC Displaying an image from a PCBefore attaching/detaching speakers Removing the speakers This unit has detachable type speakersUseful adjustment settings Image position AV input mode onlyDescription Moving the picture on the screen Useful adjustment settingsFine Sync. adjustment PC input mode only Auto Sync. adjustment PC input mode onlyFor automatically adjusting the PC image PhaseInput signal source Input signal settingInput selection AV mode selection Colour system setting AV input mode onlySignal system of your equipment, and then Press a/b to select Colour System, and then press EnterWide mode for AV input mode Manual SelectionAuto Selection Wide mode for PC input mode Press a/bto select Input Signal and then press Enter Input signal PC input mode onlyPress a/bto select the desired input signal on the display ExamplePicture aspect ratio AV input mode only Wide screen signalling WSS AV input mode onlyWSS signal 43 screen Mode Normal Press a/bto select WSS, and then pressFull Mode screen Full mode Mode1 Selecting Full Mode display AV input mode onlyFull mode Mode2 Press a/bto select Full Mode, and then press EnterAV input mode PC input modeRotate Audio out Sleep timerPress a/bto select Audio Out, and then press Enter Press c/d to select Fixed or Variable, and then press EnterPress a/bto select Cool Climate, and then press Enter Cool climateSetting a password Password setting for child lock TV mode onlyClearing the password Enter the 4-digit number as a password usingUseful features Dual screen functionsDual screen Useful features Picture and still image Teletext language settingUpdate the still image by pressing Enter Press d to exit still imageWhat is Teletext? Useful featuresTeletext mode Teletext functionDisplaying TOP Overview Useful features Displaying SubpagesTOP Overview screen Subpage screenUseful features Time display Troubleshooting Problem Possible SolutionAppendix Appendix PC compatibility chart640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 HzPC Control of the System RS-232C port specificationsResponse code format CommandsOptional accessory Specifications30oLCD Colour TV, ModelLC-30HV4M Part name Part number Wall mount bracket AN-37AG1Dimensional drawings Dimensional drawings Press a/bto select Auto Installation Press Enter HOW to SET the Factory PresetsSharp Corporation