Sharp LC-30HV4M operation manual Wide mode for AV input mode, Manual Selection, Auto Selection

Page 51

Useful adjustment settings

WIDE MODE

Normal

Full 14:9

Zoom 14:9

Panorama

Full

Cinema 16:9

Cinema 14:9

WIDE mode (for AV input mode)

Manual Selection

1 Press f.

•The WIDE MODE menu displays.

•The menu lists the wide mode options selectable for the type of video signal currently received.

2 Press f or a/b while the WIDE MODE menu displays on the screen.

•As you toggle down the options, each is immediately reflected on the Display. No need to press ENTER.

 

 

 

Auto Selection

 

 

 

If you set “WSS” and “4:3 Mode” in the Setup menu on

 

 

 

page 53, the optimum WIDE mode is automatically

 

 

 

chosen for every broadcast containing the WSS

 

 

 

information.

 

 

 

“WSS” menu

 

 

 

To enable Auto Selection, set “WSS” in the Setup menu

 

 

 

to “On”. (See page 53.)

 

 

 

“4:3 Mode” menu

 

 

 

To set the type of the wide screen, select “Normal” or

 

 

 

“Panorama” in the 4:3 Mode menu. (See page 53.)

 

 

 

NOTE

 

 

 

• If the broadcast signal contains no WSS information, Auto

4:3 Mode set to “Normal”

4:3 Mode set to “Panorama”

Selection will not function even when the WSS option is

enabled.

 

 

 

 

 

 

 

Selected item

 

 

Description

 

 

Normal

For 4:3 “standard” pictures. A side bar appears on each side.

 

 

Full 14:9

For 14:9 squeeze pictures. A thin side bar appears on each side.

 

 

Zoom 14:9

For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on

the top and bottom with some programmes.

 

 

 

Panorama

In this mode the picture is progressively stretched toward each side of the screen.

 

 

Full

For 16:9 squeeze pictures. There are two display settings to choose from. (See page 54.)

 

 

Cinema 16:9

For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

 

 

Cinema 14:9

For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

 

 

 

 

Normal

Full 14:9

Zoom 14:9

Panorama

Cinema 14:9

Cinema 16:9

Full

50

Page 50 Page 52
Image 51
Page 50 Page 52
Contents LC-30HV4M LC-30HV4M ContentsDear Sharp customer Important Safety PrecautionsPrecautions when transporting the Display Important Safety PrecautionsSupplied accessories Where to place the System Setting the System in placePreparation Removing the terminal cover Setting the SystemConnecting the system cable and the AC cord to the Display PreparationClosing the terminal cover Display rear viewCables come out from the small opening Hanging on the wall Setting the Display on the wallSetting the AVC System with the stand Using an optional bracket to mount the DisplayInserting the batteries Using the remote control unitDisplay Part namesPart names AVC SystemRemote control unit Basic connection Connecting to an antennaConnecting to the power outlet Watching TVTurning on the power Turning off the powerWatching TV Simple button operations for changing channels Using Flashback a on the remote control unitUsing CHa/bon the remote control unit Using 0 9 on the remote control unitMute Simple button operation for changing volume/soundChanging the volume Using eon the remote control unitSRS sound options Watching TV Using hon the remote control unitWatching TV Using Sound on the remote control unit List of AV menu items to help you with operations Basic adjustment settingsAV input mode menu items PC input mode menu itemsPress c/dto select Yes, and then press Auto installationBasic adjustment settings Press a/bto select Password, and then press EnterAutomatic channel searching Automatic channel labellingAutomatic channel sorting Press a/bto select Auto Search, and then press Enter Programme setupPress a/b to select Programme Setup, and then press Enter Auto searchThen press Enter Basic adjustment settings Manual setting for each channelProgramme Setup Manual menu Press a/b to select Manual Adjust,Fine tuning Search tuningLabelling menu Colour systemLabelling channels Colour system menuLock menu Setting the child lockSkipping channels Skip menuPress a/bto select Sort, and then press Basic adjustment settings SortPress a/ b to select Programme Setup Sort menusPress a/bto select Language, and then press Enter Language setting for on-screen displayPC Input mode AV Input modeGreen Picture adjustmentsSelected item Cbutton Dbutton Contrast RedPress a/bto select C.M.S., and then press Basic adjustment settings S. Colour Management SystemPress a/bto select Advanced, and then press Enter Press a/b to select C.M.S., and then press EnterPress a/bto select the desired level, and then press Enter Basic adjustment settings Colour temperature BlackPress a/bto select Colour Temp, and then press Enter Press a/bto select Black, and then pressFilm mode Basic adjustment settings MonochromePress a/bto select DNR, and then press Basic adjustment settings SettingPress a/ bto select I/P Setting, and then DNR Digital Noise ReductionPress a/b to select Surround, and then press Enter Audio adjustmentSound adjustment SurroundPower Control Power Control for AV sourcePower save No Operation Off No Signal OffPress a/b to select No Signal Off, and then press Enter Press c/d to select Enable, and then Press EnterPower management Basic adjustment settings Power Control for PC sourceAVC System front view Using external equipmentWatching a DVD image Using external equipmentConnecting a DVD player For INPUT1 signal DVD playerDisplaying a VCR image Connecting a VCRFor INPUT2 signal Watching a VCR imageDisplaying broadcasts via an Hdtv tuner Connecting an Hdtv tunerFor INPUT3 signal Watching broadcasts via an Hdtv tunerConnecting a game console or camcorder Enjoying a game console and viewing camcorder imagesDisplaying an image of the game console or camcorder Displaying an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connecter Viewing an image from a PCBefore attaching/detaching speakers Removing the speakers This unit has detachable type speakersUseful adjustment settings Image position AV input mode onlyDescription Moving the picture on the screen Useful adjustment settingsPhase Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only For automatically adjusting the PC imageInput signal source Input signal settingInput selection Press a/b to select Colour System, and then press Enter Colour system setting AV input mode onlyAV mode selection Signal system of your equipment, and thenWide mode for AV input mode Manual SelectionAuto Selection Wide mode for PC input mode Example Input signal PC input mode onlyPress a/bto select Input Signal and then press Enter Press a/bto select the desired input signal on the displayPress a/bto select WSS, and then press Wide screen signalling WSS AV input mode onlyPicture aspect ratio AV input mode only WSS signal 43 screen Mode NormalPress a/bto select Full Mode, and then press Enter Selecting Full Mode display AV input mode onlyFull Mode screen Full mode Mode1 Full mode Mode2AV input mode PC input modeRotate Press c/d to select Fixed or Variable, and then press Enter Sleep timerAudio out Press a/bto select Audio Out, and then press EnterPress a/bto select Cool Climate, and then press Enter Cool climateEnter the 4-digit number as a password using Password setting for child lock TV mode onlySetting a password Clearing the passwordUseful features Dual screen functionsDual screen Press d to exit still image Teletext language settingUseful features Picture and still image Update the still image by pressing EnterTeletext function Useful featuresWhat is Teletext? Teletext modeSubpage screen Useful features Displaying SubpagesDisplaying TOP Overview TOP Overview screenUseful features Time display Troubleshooting Problem Possible SolutionAppendix 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 Hz PC compatibility chartAppendix 640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 HzPC Control of the System RS-232C port specificationsResponse code format CommandsPart name Part number Wall mount bracket AN-37AG1 SpecificationsOptional accessory 30oLCD Colour TV, ModelLC-30HV4MDimensional drawings Dimensional drawings Press a/bto select Auto Installation Press Enter HOW to SET the Factory PresetsSharp Corporation
Top Page Image Contents