Sharp PNE521P Basic Operation NSwitching the screen size, Wide Zoom Normal, Dot by Dot, Cut off

Page 6

Basic Operation

nSwitching the screen size

Even when the screen size is changed, the display may remain the same depending on the input signal.

WIDE

ZOOM 1

ZOOM 2

NORMAL

Dot by Dot

PC input

Displays image so it fills the entire screen.

 

 

AV input

An image with a 4:3 aspect ratio is stretched to fill the entire

 

screen.

PC input

An image with a 4:3 aspect ratio is enlarged to fill the entire screen

 

without changing the aspect ratio. The edges of the image may be

 

cut off.

AV input

 

PC input

Use this size if ZOOM 1 cuts off the subtitles.

 

 

AV input

 

PC input

Displays image so it fills the screen without changing the aspect

 

ratio of the input signals.

 

 

AV input

Displays the entire image of the aspect ratio of 4:3 without

 

changing the aspect ratio.

PC input

Displays the dots of the signals input from the connected PC as

 

the corresponding dots on the screen. *

 

 

AV input

Displays the dots of the input signals as the corresponding dots on

 

the screen.

 

 

*: With a monitor of screen resolution 1600 x 1200 or 1920 x 1200, selecting Dot by Dot displays the NORMAL screen.

TIPS

Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful.

When “Enlarge” is set, the screen size is fixed to “WIDE” mode.

When dual-screen display is selected, the screen size cannot be changed.

The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from external equipment).

When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to “NORMAL”.

When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction.

Depending on the original image size, black bands may remain at the edges of the screen.

E6

Image 6
Contents PN-E601 PN-E521 Contents Part Names NFront viewNRear view Part Names NRemote control unit Signal transmitter Power buttonInput button See Menu Basic OperationMute DisplayDot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayMenu PN-ZB01 optional Not attached Attached List of menu itemsMenu Items 3D-Y/CPIP/PbyP Some items may not be displayed depending on the input modeLines PbyP2 POSMenu item details NSCREENNPICTURE NSETUP 11 ENAUDIO Menu Items NOPTION NENLARGE PC input13 E NPIP/PbyPMenu Items NDual screen display Menu Items NEnlarge NZOOM2 Special SettingSetting procedure Enlarge menu, set Enlarge H/V and ENLARGE-POS H/V. SeeNSCHEDULE Power15 E DAY of the WeekAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 17 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions19 E NCommunication intervalNID numbers VOLM0030 Example IDLK0002002 VOLM0020 ←Setting of the Gamma user data 21 EHow to read the command table RS-232C command tablePower control/Input mode selection Command Command field See Direction23 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Controlling the Monitor with a PC RS-232C Setup menu 25 E Controlling the Monitor with a PC RS-232C Option menuImage Position Epos setting Horizontal orientation Vertical orientationInitialization/Functional Restriction Setting Function menu 27 EControlling the Monitor with a PC RS-232C PIP/PbyP menu Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C Others29 E Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorThis monitor is factory preset as shown below IP Address Default Gateway 0.0Controlling the Monitor with a PC LAN To set from a PC Controlling the Monitor with a PC LAN 31 EControlling with a PC Basic operationMonitor’s menu Setup SeeInformation about this monitor appears Screen SeeDNS Server User Name / Password33 E Accept IP AddressAccount Name / Password Installation Information NAME/LOCATIONAuthentication Monitor NameCondition 35 ERecipient E-MAIL Addresses ConfirmationTrap When Authentication Fails Snmp SettingTrap Setting VersionTroubleshooting 37 EPN-E601E521 G EN09L2