Sharp TU-32GAX, TU-37GAX, LC-37G2X warranty Watching TV, Turning on the power, Turning off the power

Page 20

Watching TV

Display

POWER button

MAIN POWER button

POWER indicator

AVC System

POWER button

POWER indicator

Turning on the power

Make sure that the system cable is connected before turning on the power.

1 Press MAIN POWER on the Display.

•POWER indicator (Green): The System is on. (After a few seconds, programme information appears with sound.)

•POWER indicator (Red): The System is in standby. (Go to step 2.)

2 Use any of the methods below to power on. Powering on changes the LED from red to green.

•Press the POWER button on the Display.

•Press POWER on the AVC System.

•Press POWER on the remote control.

Turning off the power

Press POWER on the remote control unit.

• The System enters standby mode and the image on the screen disappears.

• Both POWER indicators change from green to red.

Press MAIN POWER on the Display.

• The POWER indicator on the Display gradually turns off.

• When the System is turned off by MAIN POWER , you cannot turn on the power by pressing POWER.

NOTE

•If you are not going to use this System for a long period of time, be sure to remove the AC cords from the power outlet.

•Weak electric power is still consumed even when both MAIN POWER and POWER are turned off.

POWER indicator

Off	Power off

Red	The System is in standby mode.

Green	The System is on.

NOTE

• Check if the system cable is connected properly when display indicator flashes red.

19

Image 20

Contents LC-37G2X/ TU-37GAX ODISPLAYContents TU-32GAX TU-37GAXUsing external equipment ……………………………… Useful adjustment settings ………………………………Useful features …………………………………………… Dimensional drawings ……………………………………Important Safety Precautions Dear Sharp customerImportant Safety Precautions Precautions when transporting the DisplaySupplied accessories AVC System TU-32GAX/TU-37GAXDisplay LC-37G2X Supplied accessoriesDisplay LC-32G2X LC-37G2X PreparationAttaching speakers Where to place the System Setting the System in placePreparation Selecting the location of the SystemSetting the System Connecting the system cable and the AC cord to the DisplayRemoving the terminal cover AVC System rear viewCable clamp Setting the AVC System with the stand AVC System installed vertically with the standAttach each cushion to the stand as shown Fit the stand to the AVC SystemRemoving speakers LC-32G2XSetting the Display on the wall Using an optional bracket to mount the DisplayRemoving the stand Before attaching/detaching standUsing the remote control unit Inserting the batteriesConnecting to an antenna Connecting to the power outletBasic connection Simple operations for watching a TV programmePart names DisplayAVC System Part namesRemote control unit When using the remote control unit, point it at the DisplayWatching TV Turning on the powerTurning off the power Using Flashback a on the remote control unit Using CHr/son the remote control unitUsing 0 9 on the remote control unit Simple button operations for changing channelsWatching TV Using MPX on the remote control unit Using e on the remote control unit Simple button operation for changing volume/soundChanging the volume Basic adjustment settings Menu operation buttonsOn-Screen Display ExampleTV/AV input mode menu items PC input mode menu itemsBasic adjustment settings List of PC menu items to help you with operationsAuto search Auto installationProgramme setup Basic adjustment settings Manual setting for each channel Search tuningProgramme Setup Manual Adjust menu Fine tuningColour system Labelling channelsColour system menu Labelling menuSetting the child lock Setting the boosterSkipping channels Skip menuBasic adjustment settings Sort Erase ProgrammePress a/bto select Sort, and then press Erase programme menusLanguage setting for on-screen display OPC settingUsing OPC on the remote control unit Using OPC on the menu screenAdjustments items for PC source Picture adjustmentsAdjustments items for AV source Basic adjustment settings S. Colour Management System Colour temperatureBlack Management SystemBasic adjustment settings 3D-Y/C Monochrome Activating 3D-Y/C on the remote control unitFilm mode SettingSelected item Cbutton Dbutton Treble Audio adjustmentDolby Virtual Power control for PC source Power controlPower control for AV source Using memory card Important notes on using memory cardsCopyright Recording formatsUsing memory card Commercially available memory cardsPreparing a memory card Memory card name Storage capacityUsing memory card Card Setup mode menu items Precautions when playing back PC image data on the LCD TVSlide show operation panel Motion picture operation panel Recording formats of image dataInserting a PC card adapter Ejecting the cardRecording a still image Press E RECUsing memory card Selecting Still mode Setting Slide ShowDisplaying a still image Displaying slide showProtecting/unprotecting still image files Using memory card My Programme Audio SelectTo cancel My Programme setting Using memory card Deleting a still image file Deleting a still image fileRepeat the operations in steps 7 AboveUsing memory card Recording a motion picture Rec. ModeSelecting Video mode To display the remaining record timeUsing memory card Pre-recording Protecting/unprotecting motion picture filesRepeat DescriptionUsing memory card Deleting a motion picture file FormatPress a/bto select Delete File, and then press Enter Press a/bto select Delete All, and then press EnterUsing external equipment For INPUT3 signalDisplaying an external equipment image Displaying a DVD image ExampleHdtv tuner Using external equipment Connecting an Hdtv tunerConnecting a VCR Using external equipment Connecting a DVD player Connecting a game console or camcorderDVD player AVC System front viewUsing external equipment Connecting a PC Use the INPUT5 terminals to connect a PCUsing external equipment Connecting external speakersHow to connect Speaker cable Selecting speakersUseful adjustment settings Image position for TV/AV input modeAuto Sync. adjustment PC input mode only Audio OnlyFine Sync. adjustment PC input mode only Useful adjustment settingsSelecting input signal type Input SelectOut, and then press Enter Colour system setting for TV/AV input modeInput Label AV mode selection Wide screen signalling WSS for TV/AV input modePicture aspect ratio for TV/AV input mode WSS signal 43 screen Mode NormalAuto Selection Wide mode for TV/AV input modeManual Selection Wide mode for PC input mode Input signal 640m480Input signal 1024m768 Input SignalQuick Shoot Input signal PC input mode onlyDNR Digital Noise Reduction Rotate Press a/bto select the desired mode,Normal normal image Mirror mirror image Upside Down upside Rotate rotated image Down imageSleep timer Audio outAllows you to select what controls the audio output VariablePassword setting for child lock for TV input mode Setting a password Changing a passwordResetting the password Enter the 4-digit number as a password usingUseful adjustment settings Centre Channel Input AV amplifier DVD player, etcUseful features Dual screen functionsDual screen Picture and still imageTeletext language setting Teletext function Useful features Displaying Subtitle Time displayDisplaying TOP Overview TOP Overview screenAppendix TroubleshootingProblem Possible Solution PC compatibility chart AppendixRS-232C port specifications PC Control of the SystemCommands Response code formatSpecifications Optional accessoriesTU-32GAX AVC System TU-37GAX AVC System Part name Part numberDimensional drawings Dimensional drawings LC-37G2XAVC System HOW to SET the Factory Presets Local Call 1 300 135 R R a N T Y