
Useful adjustment settings
Input signal (PC input mode only)
•Some input signals may have to be registered manually to display properly.
•The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
640g400720g400
640g480848g480
1024g7681280g768
NOTE
•You can only select the “Input Signal” on the Setup menu when receiving one of the 6 input signals listed above.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
• Setup menu displays.
3 Press a/bto select “Input Signal” and then press ENTER.
4 Press a/bto select the desired input signal on the display.
640 x 480
848 x 480
(Example)
DNR (Digital Noise Reduction)
Produces a clearer video image.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Option”.
3 Press a/bto select “DNR”, and then press
ENTER.
•Some items may be greyed out. They are not selectable.
4 Press a/bto select the desired level, and then press ENTER.
Off
High
Low
Quick Shoot
Improves LCD response when viewing
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Option”.
3 Press a/bto select “Quick Shoot”, and then press ENTER.
4 Press c/d to select “On”, and then press
ENTER.
|
|
|
|
|
|
| On |
|
| Off |
|
|
|
|
|
|
|
NOTE
•Quick Shoot may cause image noise. If this occurs turn the function “Off”.
57