Sharp LC-32G2X warranty Using external equipment, Connecting external speakers, Selecting speakers

Using external equipment

Speaker Setup

Connecting external speakers

Rear view

How to connect the

speaker cable

1 Push down the tab.

2Insert the end of the

cable.

3Lift the tab back

up.

When using external speakers

• Change the speaker setting to “SPEAKER-B”.

Make sure to connect the speaker terminal and cable polarity (L, +) properly

•The speaker terminal has plus (L) and minus (+) polarity.

•Plus is red and minus is black.

•The cables are also divided into plus and minus.

•When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables.

NOTE

•Unplug the AC cord from the AC outlet before installing the speakers.

CAUTION

•Make sure external speakers have 4 ohm and 10 watt specifications.

•Connect the plus/minus terminals with the correct cables. Incorrect connection may cause a short.

Selecting speakers

You can output audio using the supplied speakers or other external speakers.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

3 Press a/bto select “Speaker Setup”, and then press ENTER.

4 Press a/b to select “Speaker”, and then press ENTER.

5 Press c/d to select “SPEAKER-A” or “SPEAKER-B”, and then press ENTER.

Selected item	Description
SPEAKER-A	Speaker connected to the Display.
SPEAKER-B	Speaker connected to the AVC System.

External Audio Bypass

External Audio Bypass automatically optimises the audio quality to suit internal (supplied) speakers.

1 Repeat steps 1 to 3 in Selecting speakers above.

2 Press a/b to select “External Audio Bypass”, and then press ENTER.

3 Press c/dto select “Yes” or “No”, and then press ENTER.

Selected item	Description
No	Sets the optimum audio for the internal
	(supplied) speakers.
Yes	When you are using your own speakers,
	output the original sound.

NOTE

•External Audio Bypass is greyed out when Dolby Virtual is set to “On”.

•When using external speakers (SPEAKER-B), make sure to set “External Audio Bypass” to “Yes”.

•When Dolby Virtual is on, External Audio Bypass automatically sets to “Yes”.

50