Sharp PN-T321 operation manual Binding Cables, Setting the USB flash drive cover, 11 E

Page 13

Binding Cables

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.

Attach the cable clamp to the back of the monitor, and fasten the cables.

Cable

Cable clamp

Setting the USB flash drive cover

1.Insert the USB flash drive into the USB port.

USB port

TIPS

2.Attach the USB flash drive cover and secure with the provided screw.

Insert the claw (1) into the monitor, and while pressing in the direction of (2), insert the claw (3) into the monitor.

(3)

Screw (3) (black)

(1)

USB flash drive cover

(2)

•If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 3-1/8 inch (80 mm) (L) × 15/16 inch (25 mm) (W) × 7/16 inch (12 mm) (H).

•To remove the USB flash drive cover, reverse the procedure. Using excessive force may break the claws. Exercise caution.

Caution

• Do not touch any screws other than the black screw.

11 E

Page 12 Page 14
Image 13
Page 12 Page 14
Contents
PN-T321 A. only Important Information Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in vertical orientation For the monitor in horizontal orientationSupplied Components Contents NFront view NRear view Part NamesSignal transmitter Part Names NRemote control unitUSB flash drive connection Connecting Peripheral EquipmentConnecting the Power Cord Binding Cables Setting the USB flash drive cover11 E Insert the USB flash drive into the USB portChanging the battery Preparing the Remote Control UnitRemote control operation range Turning on the main power Turning Power On/OffTurning power on/off Disabling power on/off operationsMenu Basic OperationMute Display15 E Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotBasic Operation Auto playback of image and audio files Slideshow17 E Menu ItemsDisplaying the menu screen NExample of operationMenu Items Menu item detailsNSCREEN D-SUB input NPICTUREList screen 19 ENAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment Opening the adjustment pattern21 E NCommand format Communication procedureControlling the Monitor with a PC RS-232C PC connectionWhen a command has not been executed When a command has been executed correctlyIf execution of the command is taking some time 23 ERS-232C command table Controlling the Monitor with a PC RS-232C Others 25 ETroubleshooting NProduct Specifications Specifications27 E NPower management Specifications NDimensional DrawingsNDDC plug and play 29 E Specifications NCompatible signal timing PCNPC/AV DVI-D input terminal pins Specifications NCompatible signal timing AVNPC D-sub input terminal pins NPC/AV Hdmi input terminal pinsPN-T321 M EN10M1
Related manuals
Manual 6 pages 41.41 Kb
Top Page Image Contents