Sharp PN-T321 operation manual Preparing the Remote Control Unit, Changing the battery

Page 14

Preparing the Remote Control Unit

Batteries and an insulation sheet are preinstalled in the remote control at the factory. Before using the remote control, be sure to remove the insulation sheet.

Insulation sheet

Pull out

Changing the battery

1.Pull out the battery case.

Press the catch on the battery case while pulling out the case.

Remote control operation range

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor.

Remote control

sensor

Catch

Battery case

 

2.Insert the battery.

Make sure the polarities (+ and -) of the battery are oriented correctly.

Lithium battery (CR2025)

10°

10°10°

10°

TIPS

16.4 feet (5 m)

3.Insert the battery case into the remote control.

Insert until you hear a click.

TIPS

•Do not use a battery other than a CR2025 battery.

•The preinstalled batteries in the remote control were installed at the factory, and therefore may become depleted before the specified usage time is reached.

•When the batteries become exhausted, replace them with new (commercially available) batteries.

•If you will not be using the remote control for a long time, remove the batteries.

•Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

•Do not sit with the remote control in your pants pocket. This may break the remote control.

•Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

•The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

•Objects between the remote control unit and the remote control sensor may prevent proper operation.

•Replace the batteries when they run low as this may shorten the remote control’s operation range.

•If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

•Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

E12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PN-T321 A. only Important Information Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in horizontal orientation For the monitor in vertical orientationContents Supplied ComponentsPart Names NFront view NRear viewPart Names NRemote control unit Signal transmitterConnecting Peripheral Equipment USB flash drive connectionConnecting the Power Cord 11 E Setting the USB flash drive coverBinding Cables Insert the USB flash drive into the USB portRemote control operation range Preparing the Remote Control UnitChanging the battery Turning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsMute Basic OperationMenu DisplayWide Zoom Normal Basic Operation NSwitching the screen size15 E Dot by DotAuto playback of image and audio files Slideshow Basic OperationDisplaying the menu screen Menu Items17 E NExample of operationNSCREEN D-SUB input Menu item detailsMenu Items NPICTURE19 E List screenNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment Opening the adjustment pattern21 E Controlling the Monitor with a PC RS-232C Communication procedureNCommand format PC connectionIf execution of the command is taking some time When a command has been executed correctlyWhen a command has not been executed 23 ERS-232C command table 25 E Controlling the Monitor with a PC RS-232C OthersTroubleshooting 27 E SpecificationsNProduct Specifications NDDC plug and play Specifications NDimensional DrawingsNPower management Specifications NCompatible signal timing PC 29 ENPC D-sub input terminal pins Specifications NCompatible signal timing AVNPC/AV DVI-D input terminal pins NPC/AV Hdmi input terminal pinsPN-T321 M EN10M1
Related manuals
Manual 6 pages 41.41 Kb

PN-T321 specifications

The Sharp PN-T321 is a high-performance commercial display designed for a wide range of professional environments, including classrooms, conference rooms, retail spaces, and more. With its impressive features and advanced technologies, the PN-T321 stands out as a versatile solution for businesses looking to enhance their visual communication.

One of the key characteristics of the Sharp PN-T321 is its stunning 32-inch LED display, which offers a Full HD resolution of 1920 x 1080 pixels. This ensures that images and videos are presented with remarkable clarity and vivid colors, making it an ideal choice for presentations, advertising, and interactive experiences. The display also features an anti-glare finish and wide viewing angles, allowing for clear visibility from various positions in a room.

The PN-T321 is equipped with advanced touchscreen technology, which enables interactive capabilities that foster engagement during presentations or collaborative sessions. The multi-touch functionality allows multiple users to interact with content simultaneously, making it perfect for brainstorming sessions or group activities. The display is compatible with various touch technologies, such as infrared and capacitive touch, providing flexibility based on user needs.

Connectivity options are abundant on the PN-T321, featuring multiple HDMI and VGA inputs alongside USB ports, which facilitate simple integration of various multimedia devices. This makes it easy to connect laptops, cameras, and other peripherals, ensuring a seamless experience for users. Additionally, the display includes built-in speakers, eliminating the need for external audio equipment in many scenarios.

The Sharp PN-T321 is designed with user-friendliness in mind, featuring an intuitive interface that makes navigation smooth and straightforward. Integrated software solutions, including Sharp's pen and finger touch applications, allow users to create dynamic presentations and annotations directly on the screen.

Durability is another notable characteristic of the PN-T321. The display is built for continuous operation, making it suitable for environments where it may be on for prolonged periods. It also includes features like a fanless design to minimize noise, ensuring a quiet operation in any setting.

In summary, the Sharp PN-T321 combines high-definition visuals, interactive features, and versatile connectivity options, making it an exceptional choice for organizations looking to enhance their communication and collaboration efforts. Its robust design and user-friendly interface further add to its appeal, ensuring that it meets the demands of diverse professional environments.
Top Page Image Contents