![](/images/new-backgrounds/1206513/20651335x1.webp)
Basic Operation
Auto playback of image and audio files (Slideshow)
When the input mode is set to USB and a USB flash drive is inserted in the USB port, the image files in the root folder of the USB flash drive will be automatically displayed as a slideshow. If there is an audio file in the root folder, the audio file will also automatically play. If you want to present a slideshow in a different folder, see page 19.
TIPS
•Playback will also start automatically if you change from an input terminal other than USB to USB with a USB flash drive inserted.
•The types of files that can be played in USB flash drive are as follows:
File system | FAT16, FAT32 |
|
|
Image files | jpg (jpeg), png |
|
|
Audio files | mp3 |
| Bit rate: 32 kbps to 320 kbps |
| Sampling frequency: 32kHz, 44.1kHz, 48kHz |
| WMA |
| Bit rate: 32 kbps to 192 kbps |
| Sampling frequency: 32kHz, 44.1kHz, 48kHz |
| (WMA9 files are not supported.) |
|
|
•In some cases it may not be possible to play the above files.
•Use
•Up to 600 files can be handled in the slideshow folder.
•When file names or folder names are long, some characters may not appear in the list screen.
•If there are no image files in the root folder of the USB flash drive, the list screen will appear (page 19).
•In PowerPoint, files can be saved in jpeg or png format.
•To change data transfer to the USB flash drive or the order of slideshow display, use the USB Flash Drive Media Tool on the
•During a slideshow, the remote control or some buttons may not respond when operated.
This is caused by the heavy image processing load and is not due to a product failure or problem.
E16