Sharp LC-70LE747EN, LC-90LE757RU Aquos Link setup Basic operation, Operating an Aquos Link device

Page 35

AQUOS LINK

AQUOS LINK setup

Basic operation

Go to “TV Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set.

AQUOS LINK control

Set to “On” to enable HDMI CEC functions.

Auto power on

If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

NOTE

• The factory default for this item is “Off”.

Selecting recorder

Here, you can select a recorder for the recording from several connected recorders.

NOTE

If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external source’s indication changes (e.g., from “HDMI 1” to “HDMI 1 (Sub)”).

Selecting channel key

This function allows you to select the channel of the connected HDMI device using the TV’s remote control unit.

1Press a/bto select the input source of the connected HDMI device you want to control

using the TV’s remote control unit, and then press ;.

2Press c/dto select “On”, and then press ;.

Using genre info.

This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast.

Audio return channel (ARC)

If this function is set to “Auto”, the TV can send audio data for video content shown on the TV to a connected audio device with just one ARC- compatible cable. Using this function eliminates the need to use a separate digital or analogue audio cable.

Connection for using “Audio return channel”

You need to use ARC-compatible cables/devices and connect to the HDMI 1 terminal to activate this function. The connection method is the same as Connecting an

AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system (Page 32).

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI- connected device with a single remote control unit.

1Press I to start playback of a title.

See the section Top menu/title list if you want to start playback using the list of the titles in the AQUOS BD player/AQUOS recorder.

2Press J to fast forward. Press G to reverse.

Press REC E to start recording.

Press REC STOP H to stop recording. Press H to stop.

Press F to pause.

Press B to turn the HDMI-connected device on/off.

NOTE

Refer to Regarding “Select recording device” (Page 31), when the buttons for AQUOS LINK devices do not work.

AQUOS LINK menu

You can select the AQUOS LINK menu from the “Link operation” menu to arrange the settings for sound or an external device.

Recorder power on/off

You can call up the CEC-compatible recorder’s EPG and preset timer recordings using the TV’s remote control unit.

1Press a/bto select “Recorder power on/off”, and then press ;.

The external input source switches and the recorder’s EPG is displayed.

2Select the programme to record.

Refer to the operation manual of the recorder for details.

33

Image 35
Contents Model CE Statement Dear Sharp customer ContentsIntroduction Caring for the cabinet Important safety precautionsPrecautions when transporting the TV 3D glasses AN-3DG40, sold separately Number Supplied accessories Optional accessoriesPart name For 70 inch models PreparationAttaching the stand unit For 80/90 inch modelsPreparation For 80/90 inch models For 70 inch models Using the remote control unit Inserting the batteriesAngle of the remote control unit Programme Part names and functionsTV front/side view TV rear viewRemote control unit Operation overview Preparation Connecting the TVPreparation Setting the TV Quick guideDaily operation Advanced featuresEnjoy additional features CI plus 1.3 Standard Recording CAM PIN settingGo to TV Menu Setup Option CI setting CI menu Inserting the CA card into the CI module3Exit the Home screen Using the Home screen1Display the Home screen 2Select an itemSelecting in the Menu Using the Menu screenUsing Software keyboard Display the Menu screenConfirm the following before turning on the power Initial auto installationInitial auto installation Searching for cable broadcasts Digital broadcast settingAnalogue broadcast setting Searching for terrestrial broadcastsSearching for satellite broadcasts Single satellite setting Search startChannel strength DVB-T/T2/C/S/S2 Checking signal strengthSupplying power to the antenna Checking signal strengthSelecting an external video source Daily operation Switching on/offWatching TV Changing channelsChannel display Selecting a sound modeOperation without a remote control unit Operator profile Before installationHow to add / remove / move your favourite channels Favourite Channel InformationGenre icon list Useful settings for using EPGDisplay range setup Genre icon setupSelecting a programme using EPG Important information Timer setup using EPGCancelling the timer setup Cancelling using B button on the remote control unitButtons for teletext operations What is teletext?Teletext Turning teletext on/offHbb TV application Data service settingWhen Data service setting is set to On MHEG-5 application UK onlyConnection method for other devices Connecting external devicesBefore connecting Introduction to connectionsVideo connections Hdmi connection When using the Hdmi 2 terminalC R Component connection Scart connectionVideo connection Connecting an amplifier with digital/analogue audio inputsAfter connecting Digital audio output settingWhat you can do with Aquos Link Controlling Hdmi devices usingWhat is Aquos LINK? Regarding Select recording deviceAquos BD player/AQUOS recorder Aquos Audio speaker system Connecting an Aquos BD player/AQUOS recorder onlyAquos Link connection  HDMI-certified cable commercially availableAquos Link menu Aquos Link setup Basic operationOperating an Aquos Link device Media change Setup menuSound mode change Top menu/title list Recorder EPG Model selectAuto Input Selection Using a Smartphone with the TVAuto Power On Operation Using the Remote ControlGo to TV Menu Setup Picture Basic adjustmentPicture settings AV modeAdvanced Picture adjustmentsRange of OPC Gamma adjustmentFilm mode Active contrastAudio description setting Audio settingsAuto volume Audio adjustmentECO picture control Power save settingsNo signal off Sleep timerProgramme setup View settingsDigital setting Auto installationCable Buttons for Manual adjust operationFavourite network selection Erase programme When selecting Yes Individual setting PINIndividual setting Clock Clock setupLanguage Individual setting LanguageDigital audio language SubtitleMode only DTV/SAT mode Optional features settingsWide mode Auto wide only DTV/SAT modeAudio select Terminal settingDigital audio output Input skip Input labelColour system Headphone out settingAdjusting image position Headphone/Audio out selectIllumination Additional featuresWallpaper setting Boot pictureGame play time Key lock Cancelling the lockUSB-recording Other useful featuresConnecting a USB HDD Disconnecting the USB HDDREC E How to operate USB-recordingRemote control unit Control panel Buttons Description Buttons for USB-recording operationUSB-recording playback USB-recording timer settingTimer list Device registration Jump time settingTime shift playback Auto input selectionUSB media/Home network Photo modeSlide show Music modeSelecting the BGM Disconnecting the USB device Video mode3D mode Buttons for playing mode When using USB media modeHome network server compatibility DivX setupSelecting the picture size for video mode USB device compatibilityDisplaying a PC image on the TV Selecting the picture size Connecting a PCConnecting a PC Fine sync Adjusting the PC image automaticallyAdjusting the PC image manually Auto syncFrequency Sub PC compatibility chartResolution Horizontal Vertical Analogue Digital VesaPC control of the TV Control Contents Command listHow to connect Network setupConnecting to the network Wired connection overviewWireless installation Wireless connection overviewOption menu What is Net TV?Net TV Operations in Net TV Basic operationClear Net TV memory Video storeInputting texts Enjoying 3D image viewing Before using the 3D glassesPart Names Preparing for the 3D glasses Supplied accessories Power button  LED indicator  Nose pad Usage Range of the 3D Glasses Using the 3D glasses Before using the 3D GlassesUsing the 3D glasses Attaching the Nose Pad1Use the tip of a ballpoint pen or similar object Replacing the BatteryReplace the battery 3D glasses lenses Display format for 3D and 2D images Using the 3D2D mode Without Using the 3D GlassesCan be detected automatically Switching 3D to 2D modeReceiving a 3D image signal that Viewing 3D imagesWatching 2D images in 3D Switching to the previous modeConfiguring the TV settings to enhance 3D image viewing 3D picture adjustments3D setup Troubleshooting 3D Images Specifications 3D glasses sold separatelyAppendix TroubleshootingReset Reset the PINPicture / Audio test Download setupGetting update information Updating your TV via DVB-T/T2/ C/S/S2Information on the software licence for this product Software updateReceiver report IdentificationTrademarks Browser This product includes the OperaSpecifications WPA2-PSK AES Specifications Wireless LAN USB adapterLC-70LE747E/LC-70LE747RU/LC-70LE747EN/LC-70LE747KN Environmental specificationsWall mount audio setup Mounting the TV on a wallStandard dimensions for wall mount kits are shown below Wall mount kit specificationsAbbreviation list Rating table for child lockLC-80LE657E LC-80LE657RU LC-80LE657EN LC-80LE657KN Dimensional drawingsLC-70LE747E LC-70LE747RU LC-70LE747EN LC-70LE747KN LC-90LE757E LC-90LE757RU LC-90LE757K EU Energy Label for Televisions XYZ13P05-PL-NG