Sharp LC-90LE757E MHEG-5 application UK only, Hbb TV application, Data service setting

Watching TV

MHEG-5 application (UK only)

Some services bring you programmes with the MHEG application encoded, letting you experience DTV interactively. When provided, the MHEG-5 application will start when you press m.

NOTE

•MHEG may not be displayed properly in 3D mode.

•You can view some MHEG-5 content even if you do not perform “Network setup”. Furthermore, “Network setup” allows you to view additional content such as interactive content from “HOME” > “Network setup”.

•You cannot view MHEG-5 content when MHEG-5 content is not broadcast even if you perform the appropriate “Network setup”. Carefully check the broadcast programme.

Hbb TV application

If the channel you are currently watching provides HbbTV service, you can enjoy a variety of services.

NOTE

•This application is not available when “UK” or “Italy” is selected for the country setting.

•HbbTV may not be displayed properly in 3D mode.

•You need to perform “Network setup” to enjoy HbbTV application. Please navigate “HOME” > “Network setup”.

View setting

Data service setting

Set the Hbb TV service starting settings (“On”, “Off”).

Go to “TV Menu” > “Setup” > “View setting” > “Data service setting”.

NOTE

•If “Data service setting” is set to “On”, the TV will load the Hbb TV pages automatically.

•To avoid automatic loading, you can set to “Off”.

•Subtitles for teletext may not display when Hbb TV service is started. In such cases, set to “Off”.

Open Hbb TV pages

If the channel you are currently watching provides data service, you can enjoy Hbb TV content.

EWhen “Data service setting” is set to “On”

Press R to display the data service screen.

NOTE

•After changing the channel, please wait momentarily until “HbbTV” icon is displayed on the screen (HbbTV).

Using data service

1Press a/b/c/dto select a desired option, and then press ;. The selected service will be started.

NOTE

•Operations vary depending on the Hbb TV application.

•If a certain function appears on the screen, you can use the offered function by pressing the colour buttons.

•Text can be inputted using the numbers and letters printed on the numeric buttons on the remote control unit.

2If you press END, data service will close.

26