Sharp LC-60LE636S, LC-60LE636E, LC-60LE635E, LC-60LE635RU operation manual Start search

Initial auto installation
7 Press a/bto select “OK”, and then press ;.	2When starting the satellite search			E Change setting:
	after setting the scrambled stations:			1 Press c/dto select “Change setting”, and then
	Press c/dto select “Next” on the DVB-S/S2			press ;.
After completing this setting, the screen				• The setting screen of “Scrambled stations” and
	setting screen shown in the left column on page
switches to the DVB-S/S2 setting screen shown	16, and then press ;.			“Symbol rate” is displayed.
in the left column on page 16.	NOTE			Scrambled stations	[No]
NOTE
	• When you perform the initial auto installation, “Next”			SAT1-Symbol rate 1
• Follow the instructions on the screen for “2 satellites	cannot be selected. Completing “Change setting”			SAT1-Symbol rate 2
on 22kHz switchbox”, “2 satellites on toneburst	enables you to select “Next”.			SAT2-Symbol rate 1	Yes	No
switchbox”, “Max. 4 satellites on DiSEqC multiswitch”
and “Communal satellite system” settings.
• To set multiple satellite channels, go to “Max. 4 satellites	Scrambled stations: No
on DiSEqC multiswitch”.				Search start
• Follow the procedure below when the supply of power	Satellite	Symbol rate 1	Symbol rate 2
is needed for a satellite antenna:				2 Press a/bto select “Scrambled stations”, and
Go to “Menu” > “Setup” > “View setting” > “Channel
				then press ;.
settings” > “Antenna setup-DIGITAL” > “Satellite setup”
				• Scrambled stations: Specifies if you need to add
> “Change setting” > “Communal satellite system”.	other
				pay-TV services.
	Start search	Change setting		3 Press c/dto select “Yes”, and then press ;.
				4 Press a/bto select the symbol rate you want
				to modify, and then press ;.

E Start search:		• Symbol rate: You need to set each symbol rate of
DVB-S/S2 channel searching.		all the satellite broadcasts that the TV can receive
1 Press c/dto select “Start search”, and then		(eight is the maximum number of symbol rates that
		can be displayed).
press ;.
	5	Press c/dto select “Search start”, and then
2 The TV searches for and stores all the receivable
		press ;.
TV stations according to their settings and the	6
		The TV searches for and stores all the receivable
connected antenna.
		TV stations according to their settings and the
• Select “Yes” to sort the search result in alphabetical
order.		connected antenna.
• To abort the initial auto installation in progress,		• Select “Yes” to sort the search result in alphabetical
press 6.		order.
		• To abort the initial auto installation in progress,

press 6.

17