Advanced

Basic adjustment

Picture

This TV provides various advanced functions for optimising the picture quality.

Go to “Menu” > “Setup” > “Picture” > “Advanced”.

C.M.S.-hue

This function adjusts the hue of a selected colour using a six-colour adjustment system.

C.M.S.-saturation

This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.

C.M.S.-value

This function adjusts the brightness of a selected colour using a six-colour adjustment system.

Colour temp.

Adjusts the colour temperature to give the best white image.

		Item
	High	White with bluish tone.
	Mid-High	Intermediate tone between “High”
	Mid-High	and “Middle”.
		and “Middle”.
	Middle	Natural tone.
	Mid-Low	Intermediate tone between “Middle”
	Mid-Low	and “Low”.
		and “Low”.
	Low	White with reddish tone.
	R/G/B Gain (LO),	Adjusts the white balance by
	R/G/B Gain (HI)	changing the value of each item.

Fine motion advanced

“Fine motion advanced” technologies provide superior solutions for digital display picture quality removing motion blur (“High”, “Low”, “Off”).

NOTE

•This effect is greater on fast moving images.

•These functions will have no effect in the following cases.

1)The type of signal received is a PC signal.

2)An OSD is being displayed.

3)Teletext is activated.

•If images appear blurred, set to “Off”.

Gamma adjustment

Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e2 to a minimum of f2.

Film mode

Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality (“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).

Active contrast

Automatically adjusts the contrast of an image according to the scene.

DNR

“DNR” produces a clearer image (“Auto”, “High”, “Middle”, “Low”, “Off”).

NOTE

•This function may not be available depending on the input signal type.

Monochrome

For viewing a video in black & white.

Range of OPC

The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16.

NOTE

•This function is available only when the “OPC” setting is set to “On” or “On:Display”.

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•The maximum and minimum settings cannot be set to the same number.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.