Wireless connection overview | Sharp LC-60LE635RU, LC-60LE636E

Network setup

Wireless installation

Use the wireless LAN USB adapter supplied with the TV.

EWireless connection overview

PC

Wireless LAN router/access point

 Wireless LAN USB adapter (supplied)  Network

NOTE

•When using the SHARP wireless LAN USB adapter (supplied), try to provide as much free space around the device for best performance.

•Make sure the firewalls in your network allows access to the TV wireless connection.

•Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification.

•A wireless LAN access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point for setup.

EHow to connect

1Switch on your router before starting the network installation.

2Connect the wireless LAN USB adapter (supplied) to the USB 3 (WIRELESS LAN) port on the rear of the TV.

•Do not use a wireless LAN adapter other than the supplied SHARP wireless LAN adapter, as operations cannot be guaranteed.

3Go to “Menu” > “Setup” > “View setting” > “Network setup” > “Connection type”.

4Press c/dto select “Wireless”, and then press

5Select “OK” to confirm.

6Press a/bto select “Wireless setup” in the “Network setup” menu.

7Press c/dto select “Change”, and then press

8Press a/bto select “WPS”, and then press

WPS

Manual Setup

•If your router/access point does not support WPS (= Wi-Fi Protected Setup), select “Search” and follow the on-screen instructions and the operation manual of the router/access point.

•To establish the connection manually, select “Manual setup” and follow the on-screen instructions and the operation manual of the router/ access point.

9Press a/bto select “Push button”, and then press ;.

Push button

PIN code

•To establish the connection manually, select “PIN code”. Follow the on-screen instructions and the operation manual of the router/access point.

0Select “Next” to proceed.

Q Press the WPS button on the router/access point. When you press the WPS button, a progress bar will appear on the display. Wait until the connection is established.

Select “OK” when the connection details are displayed.

•If you have failed to connect to the internet in the above operation, an error message will appear. In this case, press ATV/DTV/SAT/bto return to the normal TV screen and check the relevant settings.

NOTE

•To connect your TV to the internet, you must have a broadband internet connection.

•If you do not have a broadband internet connection, consult the store where you purchased your TV or ask your internet service provider or telephone company.

•There is no need to enter the security key for subsequent connections to the wireless network.

•If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case, disable the stealth mode on the access point.

•If you want to change the IP settings manually, go to “Menu” > “Setup” > “View setting” > “Network setup” > “IP setup” and follow the on-screen instructions and the operation manual of the router.

•See page 69 to check the supplied SHARP wireless LAN adapter specifications.