Watching TV
Daily operation
Turning on/standby the power
Turning on the power
Press <on the TV or >aon the remote control unit.
Switching between digital, satellite* and analogue broadcasts
Watching digital | Watching analogue |
broadcasts | broadcasts |
Watching satellite broadcasts
Selecting an external video source
Once the connection is made, press bto display the “INPUT” screen, and then press bor a/bto switch over to the appropriate external source with ;.
CH list
INPUT
TV
Switchable
Standby mode
Press <on the TV or TV aon the remote control unit when TV is on.
•The TV enters standby mode and the image on the screen disappears.
•Weak electric power is still consumed even when the TV is turned standby mode.
•To completely turn off the power to the TV, unplug the AC cord from the AC outlet. However, do not unplug the AC cord unless otherwise instructed.
*Important information:
Satellite services are only available for the 635 model series.
NOTE
•If multiple satellite services are set, each time you press the SAT button the channel switches as follows.
SAT1 
SAT2 
SAT4 
SAT3
NOTE
•You can also select an external video source from “CH list” > “INPUT”.
•Only HDMI inputs which are not set for “Input skip” (Page 42) and properly connected inputs can be selected.
Changing channels
With :r/s | With 0_9 | |
|
|
|
|
|
|
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
19