Setting the TV on the wall, Removing the stand

Sharp LC-37PX5X Setting the TV on the wall, Removing the stand, Example Hanging on the wall

Page 11

Preparation

Setting the TV on the wall

•You can mount the TV on the wall, using the optional AN-37AG2 bracket.

•For details, refer to the instructions supplied with the optional bracket.

CAUTION

•This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the Liquid Crystal Television requires special skill that should only be performed by qualiﬁed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

<Example>

Hanging on the wall

AN-37AG2 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting

Angular mounting

Regarding the angle when mounting the TV on the wall

•The maximum angle to which you can tilt the wall-mounted TV is as follows. Do not tilt it more than the maximum angle.

LC-32PX5X

0°, 5°, 10°

LC-37PX5X

0°, 5°

LC-42PX5X

•Tilt the wall-mounted TV slowly when adjusting its angle.

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before detaching/attaching the stand

•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

•Remove all terminal covers and connected cables.

•Lay the TV down on cushioning (such as a blanket) over a table.

•Make sure two or more people perform the operation.

CAUTION

•Do not remove the stand from the TV unless using an optional bracket to mount it.

Hex key

Unfasten the four	in
place.

Detach the

(Hold theedge of the base

NOTE

• To attach the stand, perform the above steps in reverse order.

Image 11

Contents

LC-32PX5X LC-37PX5X LC-42PX5X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Inserting the batteries Using the remote control unitPreparation Short screws g4 Attaching the standPreparation Conﬁ rm the 8 screws supplied with the TVTV rear view Setting the TVBundling the cables Insert the cable clamp in the hole on the TV as shownSimple operations for watching a TV programme Connecting to an antennaConnecting to the AC outlet Basic connectionExample Hanging on the wall Setting the TV on the wallRegarding the angle when mounting the TV on the wall Removing the standTV/VIDEO button Part namesTV Front Part names TV RearRemote control unit Simple button operations for changing channels Turning on the powerTurning off the power Watching TVWatching TV Using Flashback a on the remote control unitUsing MPX on the remote control unit Still image Switches to standbyChanging the volume Using Mute e on the remote control unitOn-Screen Display Basic adjustment settingsMenu operation buttons List of TV/AV menu items to help you with operations TV/AV input mode menu itemsPC input mode menu items Basic adjustment settingsAuto search Auto installationProgramme setup If you have already set the password, enter it hereColour system Basic adjustment settings Manual setting for each channelFine tuning Search tuningSkipping channels Sound system Broadcasting systemErase programme menus Basic adjustment settings LabelErase Programme Press a/b to select Label, and then pressOPC Optical Picture Control setting AV mode selectionAdjustments items Picture adjustmentsS. Colour Management System Colour temperatureS-Hue This is a standard to adjust the colour AdvancedBasic adjustment settings Film mode Surround Audio adjustmentUsing Surround on the remote control unit Using Surround on the menu screenSetting a channel Useful adjustment settingsPassword setting for child lock for TV input mode Setting a passwordImage position Useful adjustment settingsAdjustments are stored separately according to input source Input LabelPress a/b to select On or Off, and then press Enter Wide Screen Signalling WSSWSS signal 43 screen Mode Panorama Picture aspect ratioAuto Selection Wide mode for TV/AV input modeMode menu Manual SelectionNormal Full Wide mode for PC input modeYou can select the screen size Press Wide or a/b to select a desired item on the menuLanguage setting for on-screen display Input Select Selecting input signal typeAudio Only DNR Digital Noise ReductionBlue Screen Colour system settingPower Control for PC source Power ControlPower Control for AV source Selectable Description Items Hdmi SetupPC Setup Input Signal PC input mode onlyPhase Fine Sync. adjustment PC input mode onlyPress a/ b to select a speciﬁ c adjustment Picture and still image Useful featuresDual screen functions Dual screenUseful features Teletext language settingTeletext function Displaying Subpages Select the desired subpage by using c/dDisplaying Subtitle Press to exit the subtitle screenDisplaying an external equipment image Using external equipmentConnecting a VCR Setting is stored and can be selectedDVD player Connecting a DVD playerConnecting a game console or camcorder Using external equipmentHdtv tuner Connecting an Hdtv tunerDisplaying an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connector Viewing an image from a PCResolution Horizontal Vertical TroubleshootingPC compatibility chart Problem Possible SolutionPC Control of the TV Communication procedureRS-232C port speciﬁcations AppendixResponse code format CommandsPart name Model number Optional accessorySpeciﬁcations ModelLC-32PX5X, LC-37PX5X Dimensional drawingsPassword Dimensional drawings LC-42PX5XMemo Page Printed on post-consumer recycled paper

Sharp LC-37PX5X Setting the TV on the wall, Removing the stand, Example Hanging on the wall