Preparation
Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
2
Confi rm the 8 screws supplied with the TV.
Short screws (g4) | Long screws (g4) |
(used in step 2) | (used in step3) |
1 Set the post for the stand unit onto the box.
2 Attach the base to the post.
3 Insert and tighten the 4 screws into the 4 holes on the bottom of the base.
Hex key 
Screw 
31 Insert the stand into the openings on the bottom of the TV.
2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV.
Hex key
Screw
Soft cushion
NOTE
• To detach the stand, perform the steps in reverse order.
6