Sharp LC-32PX5X, LC-42PX5X, LC-37PX5X Power Control for AV source, Power Control for PC source

Page 37

Useful adjustment settings

Power Control

Power Control setting allows you to save energy.

Power Control for AV source

No Signal Off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

• Power control menu displays.

3Press a/b to select “Power Control”, and then press ENTER.

4Press a/b to select “No Signal Off”, and then press ENTER.

5Press a/b to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

•“Disable” is factory preset value.

•When a TV programme fi nishes, and the TV receives signal input, this function may not operate.

No Operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

• Power control menu displays.

3Press a/b to select “Power Control”, and then press ENTER.

4Press a/b to select “No Operation Off”, and then press ENTER.

5Press a/b to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

Power Control for PC source

Power Management

When set, the power will automatically shut down if no signal is input for a certain time.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

• Power control menu displays.

3Press a/b to select “Power Control”, and then press ENTER.

4Press a/b to select “Power Management”, and then press ENTER.

5Press a/b to select “Mode1” or “Mode2”, and then press ENTER.

Off

Mode1

Mode2

Selected item

Description

 

 

Off

• No power management

 

• Factory preset value.

 

 

Mode1

• If no signal inputs for approximately 8

 

minutes, the power shuts down.

 

• Even if you start using the PC and the

 

signal inputs again, the TV stays off.

 

• The TV turns on again by pressing

 

POWER. (See page 13.)

 

 

Mode2

• If no signal inputs for approximately 8

 

seconds, the power shuts down.

 

• When you start using the PC and the

 

signal inputs again, the TV turns on.

 

• The TV turns on again by pressing

 

POWER. (See page 13.)

 

 

NOTE

•If you turn off the power by disconnecting AC cord when setting “Mode2” in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit.

•Pressing POWER on the display will have the same result.

35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents
LC-32PX5X LC-37PX5X LC-42PX5X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Preparation Using the remote control unitInserting the batteries Preparation Attaching the standConfi rm the 8 screws supplied with the TV Short screws g4Bundling the cables Setting the TVInsert the cable clamp in the hole on the TV as shown TV rear viewConnecting to the AC outlet Connecting to an antennaBasic connection Simple operations for watching a TV programmeRegarding the angle when mounting the TV on the wall Setting the TV on the wallRemoving the stand Example Hanging on the wallTV Front Part namesTV/VIDEO button Part names TV RearRemote control unit Turning off the power Turning on the powerWatching TV Simple button operations for changing channelsUsing MPX on the remote control unit Using Flashback a on the remote control unitWatching TV Changing the volume Switches to standbyUsing Mute e on the remote control unit Still imageMenu operation buttons Basic adjustment settingsOn-Screen Display PC input mode menu items TV/AV input mode menu itemsBasic adjustment settings List of TV/AV menu items to help you with operationsProgramme setup Auto installationIf you have already set the password, enter it here Auto searchFine tuning Basic adjustment settings Manual setting for each channelSearch tuning Colour systemSkipping channels Sound system Broadcasting systemErase Programme Basic adjustment settings LabelPress a/b to select Label, and then press Erase programme menusOPC Optical Picture Control setting AV mode selectionAdjustments items Picture adjustmentsS-Hue This is a standard to adjust the colour Colour temperatureAdvanced S. Colour Management SystemBasic adjustment settings Film mode Using Surround on the remote control unit Audio adjustmentUsing Surround on the menu screen SurroundPassword setting for child lock for TV input mode Useful adjustment settingsSetting a password Setting a channelAdjustments are stored separately according to input source Useful adjustment settingsInput Label Image positionWSS signal 43 screen Mode Panorama Wide Screen Signalling WSSPicture aspect ratio Press a/b to select On or Off, and then press EnterMode menu Wide mode for TV/AV input modeManual Selection Auto SelectionYou can select the screen size Wide mode for PC input modePress Wide or a/b to select a desired item on the menu Normal FullLanguage setting for on-screen display Audio Only Selecting input signal typeDNR Digital Noise Reduction Input SelectBlue Screen Colour system settingPower Control for AV source Power ControlPower Control for PC source PC Setup Hdmi SetupInput Signal PC input mode only Selectable Description ItemsPress a/ b to select a specifi c adjustment Fine Sync. adjustment PC input mode onlyPhase Dual screen functions Useful featuresDual screen Picture and still imageUseful features Teletext language settingTeletext function Displaying Subtitle Select the desired subpage by using c/dPress to exit the subtitle screen Displaying SubpagesConnecting a VCR Using external equipmentSetting is stored and can be selected Displaying an external equipment imageConnecting a game console or camcorder Connecting a DVD playerUsing external equipment DVD playerHdtv tuner Connecting an Hdtv tunerSignal names for 15-pin mini D-sub connector Connecting a PCViewing an image from a PC Displaying an image from a PCPC compatibility chart TroubleshootingProblem Possible Solution Resolution Horizontal VerticalRS-232C port specifications Communication procedureAppendix PC Control of the TVResponse code format CommandsSpecifications Optional accessoryModel Part name Model numberLC-32PX5X, LC-37PX5X Dimensional drawingsPassword Dimensional drawings LC-42PX5XMemo Page Printed on post-consumer recycled paper