Sharp LC-32PX5X, LC-42PX5X Useful features, Dual screen functions, Picture and still image

Dual screen functions

Allows you to display two pictures on the screen at one time.

Dual screen

You can display two pictures except when inputting from the RS-232C or PC INPUT terminal.

1Press P&P.

•Dual screen displays and a selected input source image displays.

2Press SELECT to set either screen to be active.

•“z” displays on the active screen, which has sound output.

3Press TV/VIDEO to select another input source on the active screen.

• A selected image displays.

4Press P&P to exit dual screen.

NOTE

•This function does not work under the following input conditions:

1Two pictures from the same source (e.g. INPUT 1 and INPUT 1),

2Two pictures with different vertical frequency (e.g. PAL and PAL-60, PAL (50 Hz) and NTSC (60 Hz))

•When you press P&P, the current input is moved to the left side screen display, and the other input appears on the right side screen display.

When you cannot acquire dual screen capability, perform the operation below.

— Select another input whose vertical frequency is same as one of the current inputs (e.g. PAL and PAL).

•When this function is not available, “No dual screen display available.” will display.

Picture and still image

You can freeze a motion picture on the Display.

1Press FREEZE.

•A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.

2Reshoot the still image by pressing ENTER.

•Each time you press ENTER, the image on the right screen updates.

3Press RETURN to exit still image.

NOTE

•When this function is not available, “No still image available.” will display.

•The still image automatically goes out after 30 minutes.