Sharp LC-40L550X, LC-40L650X, LC-32L450X operation manual Programme setup, Digital settings

8

• See page 12 for setting a password.

5 Press c/d to select “Yes”, and then press

ENTER.

6 Press a/b/c/d to select “DTV”, “ATV” or “ATV + DTV”, and then press ENTER. Press a/b to select the desired sound system, and then press ENTER.

• Sound system is selectable when the signal search is set to “ATV” or “ATV + DTV” mode only.

You do not need to do anything during the auto search. Press MENU to exit.

If you have already set the password, enter it here.

Press c/d to select “Setup”.

1

2

3 Press a/b to select “Auto installation”, and then press ENTER.

4

Press MENU and the MENU screen displays.

NOTE

• The values of “Signal strength” and “Signal quality” indicate when to check the appropriate alignment of the antenna.

Auto installation

You can run auto installation again, even after setting up the preset channels.

Checking Signal information (Continued)

H Checking Signal information

Press a/b to select “Signal information”.

	Auto search
	Manual search
	Manual adjust	Channel number		68
	Signal information	Signal strength
	Antenna power
			Current 100		Maximum
						100
		Signal quality
			Current	98	Maximum
						98
4	Position and align the antenna so that the
	maximum possible values for “Signal strength”

and “Signal quality” are obtained.

Programme setup

Digital settings

You can reconfi gure DTV services settings automatically or manually.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Setup”.
3	Press a/b to select “Digital programme
	setup”, and then press ENTER. If you have
	already set the password, enter it here.
	• See page 12 for setting a password.
4
	Press a/b to select the desired menu item,
	and then press ENTER.
5	Press c/d to select “Yes”, and then press
	ENTER.

H Auto search (Digital)

Use this menu to add new services automatically after auto installation has been completed.

H Manual search (Digital)

Add new services within a specifi ed frequency band.

• Press c/d to select the frequency and then press ENTER.

H Manual adjust (Digital)

Confi gure various settings for each service using the Colour (R, G, B) buttons.

Digital programme setup]

1	Press a/b to select desired service.
2	Press the colour button on the remote control
	corresponding with the item you want to
	reconfi gure.
	• Each time the colour button is pressed, you can
		switch the corresponding operation on/off.
Buttons for Manual adjust operation
Menu		Remote	Description
		control
items
		buttons
Lock		R	When the service is locked,
			you must enter your password
			whenever you tune to the service.
CH		G	Services with “Skip” are passed
Skip			over when pressing r/s in the
			TV/remote control unit.
Sort		B	The item position of services can be
			sorted.