Sharp LC-32L450X, LC-40L650X Attaching the stand, Setting the TV, Connecting the antenna cable

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

1	Confi rm the screws supplied with the TV.
	Screws (m4)
	(used in step 3)
2	Insert the stand base to the stand post on the
	bottom of the TV. (1)
3	Insert and tighten the 4 screws into the 4 holes
	on the bottom of the stand base. (2)

NOTE

• To detach the stand, perform the steps in reverse order.

Soft cushion

Screw

Screw driver

15°

15°

CAUTION

•Adjust the screen with both hands. Put one hand on the TV and rotate the screen while steadying the stand with your other hand.

The TV can be rotated up to 15 degrees to the right or left.

Setting the TV

Connecting the antenna cable

To enjoy a clearer picture, use an outdoor antenna.

Connecting the AC cord

To AC INPUT terminal

Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable)

(Only for LC-40L550X/ LC40L650X)

Antenna cable (commercially available)

To antenna

Room antenna terminalterminal (75-ohm type)

CAUTION

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

•The illustrations used throughout this manual are based on LC-40L550X.

3