Sharp LC-40L650X, LC-40L550X Turning the TV on/off, Supplying electric power to the antenna

Page 9

Turning the TV on/off

Turning on/off the power

To turn on the power

Press POWER on the TV. (After a few seconds, an image appears with sound.)

To turn off the power

Switch it off by pressing POWER on the TV.

Standby mode

To standby mode

If the TV is switched on, you can switch it to standby by pressing POWER on the remote control.

Switching on from standby

From standby, press POWER on the remote control.

NOTE

If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

Minor power is consumed when the unit is in standby mode.

Supplying electric power to the antenna

When you set-up the DTV antenna for the fi rst time, or connect the antenna to a community antenna, you need to proceed to set the antenna by following this manual.

1

Press DTV to access DTV mode.

2

Press MENU and the MENU screen displays.

3

Press c/d to select “Setup”.

4

Press a/b to select “Digital programme

 

setup” and then press ENTER.

5

Press a/b to select “Antenna power” and

 

then press ENTER.

6

Press c/d to select “Yes” and then press

 

ENTER.

Selected item

Description

 

 

Yes

Select “Yes” when your antenna is set-

 

up and connected independently.

 

 

No

Select “No” when you do not need to

 

supply voltage to your antenna, i.e.

 

when your antenna is connected to

 

a community antenna. (The factory

 

default setting of this function is “No”.)

 

 

Initial auto installation

When the TV powers on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another.

1

Press POWER on the TV.

 

• The initial auto installation wizard appears.

2

Press c/d to select “HOME” or “STORE”,

 

and then press ENTER.

 

Press c/d to select your country channels

listed on the screen, and then press ENTER. Press a/b/c/d to select “DTV”, “ATV” or “ATV + DTV”, and then press ENTER. Press a/b to select the desired sound system, and then press ENTER.

• Sound system is selectable when the signal search is set to “ATV” or “ATV + DTV” mode only.

• Auto installation will be executed.

• You do not need to do anything during the auto search.

• HOME: “STANDARD” will be the default value for the “AV mode” setting.

• STORE: “DYNAMIC (FIXED)” will be the default value for the “AV mode” setting. If the “AV mode” is changed, the TV will automatically switch back to “DYNAMIC (FIXED)” when there is no further change to TV setting for 30 minutes.

• To change the STORE mode to HOME mode, please refer to page 14 to reset the unit.

Checking Signal information

If you install a DVB-T antenna for the fi rst time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Setup”.

3

Press a/b to select “Digital programme

 

setup”, and then press ENTER.

7

Image 9
Contents Only for LC-40L550X/ LC-40L650X LC-32L450X LC-40L550X LC-40L650XPage Supplied accessories ContentsDear Sharp customer Precautions when transporting the TV Important Safety PrecautionsImportant information TrademarksSetting the TV Connecting the antenna cableAttaching the stand Connecting a VCR, game console or camcorder Connecting external devicesConnecting a DVD player/Digital TV STB Set Top Box Connecting a PCInserting the battery Remote control unitTV Front Part namesTV Rear Regarding the headphone jackInitial auto installation Supplying electric power to the antennaChecking Signal information Turning the TV on/offDigital settings Programme setupAnalogue settings Menu operation Selecting a preset AV modeSort Analogue Erase programme AnalogueAudio menu Picture menuECO menu Setup menuParental rating Hdmi auto view Hdmi input mode onlyInput skip Input labelOption menu Adjusting the PC image automatically Adjusting the PC image manuallyInput signal Digital setup menu Hearing impaired 1st Language Off 2nd Language1st Language 2nd Language Off Hearing impaired General Info screen Programme GuideWhen receiving a bilingual signal Nicam TV broadcasts When receiving a stereo signalWhen you watch the TV for the first time When receiving a monaural signalTV mode of A2 TV broadcasts When receiving a stereo signal Reminder timer setting What is an EPG?Basic Operation Display the EPG screen Wide Mode EPGPicture and still image PC Control of the TV Teletext functionRS-232C commands list PC compatibility chartCommands Commands not indicated here are not guaranteed to operateUSB Media Player Connecting a USB deviceUSB media USB mediaButtons for video mode Description Movie modeViewing video Press c/ d to select Movie mode, and thenPhoto mode Music modeButtons for music mode Description Viewing thumbnailsList of files compatible with USB mode DivX setupDivX VOD Code DivX Deactivate VOD CodeTroubleshooting Problem Possible SolutionAppendix Specifications Optional accessoryModel LC-32L450X LC-40L550X LC-40L650X Part nameProtection against overturning View from the topIs compatible with the band Dimensional drawings LC-32L450XLC-40L550X/LC-40L650X Enter the 4-digit number as a password using 0 9. The new Password is now setBe displayed