Sharp LC-40D68UT operation manual Picture Menu, OPC Setting, Advanced Picture Setting

Page 18

On-Screen Display Menu

Picture Menu

Adjusts the picture to your preference with the following picture settings.

Selected item

cbutton

dbutton

Backlight

The screen dims

The screen

 

 

brightens

Contrast

For less contrast

For more contrast

Brightness

For less

For more

 

brightness

brightness

Color

For less color

For more color

 

intensity

intensity

Tint

Skin tones

Skin tones

 

become reddish

become greenish

Sharpness

For less

For more

 

sharpness

sharpness

For resetting all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press a/b to select "Yes", and then press ENTER.

OPC Setting

Automatically adjusts the brightness of the screen.

On(Display): Displays the OPC effect on the screen while adjusting the brightness of the screen.

On: Automatically adjusts.

Off: The brightness is fi xed at the value set in "Backlight".

When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light.

When set to "On(Display)", OPC effect displays on the screen while the OPC adjusts the screen brightness.

OPC :

OPC :

When set to "On" or "On(Display)", the OPC indicator on the TV lights green.

Advanced Picture Setting

This TV provides various advanced functions for optimizing the picture quality.

C.M.S. (Color Management System)

Color tone is managed using the six-color adjustment setting.

C.M.S.-Hue:This is a standard to adjust the color either more reddish or more bluish in tone.

C.M.S.-Saturation:Increases or decreases the saturation of a selected color.

C.M.S.-Value:A higher value makes the image brighter. A lower value makes the image darker.

For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone

Mid-High:

Middle:

Mid-Low:

Low: White with reddish tone

Active Contrast

Automatically adjusts the image contrast according to the scene.

On: Automatically adjusts the image contrast.

Off: No adjustment.

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still fi lm frame for high-defi nition picture quality.

On: Detects, analyzes, converts fi lm source.

Off: Normal viewing mode.

"Film Mode" is not selectable when channel display shows an input resolution of 480p, 720p or 1080p.

Digital Noise Reduction

Produces a clearer video image.

Off: No adjustment

High/Middle/Low: Select a desired level for viewing a clearer video image.

3D-Y/C

Provides high quality images with minimal dot crawl and cross color noise.

Standard: Normal adjustment.

Fast: For moving images.

Slow: For still images.

Off: For Game Mode.

"3D-Y/C" is available for input signal from Composite Video and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.

Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences.

The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of –16.

Max.: –15 through +16

Min.: –16 through +15

The maximum setting cannot be set to a smaller number than the minimum setting.

The minimum setting cannot be set to a bigger number than the maximum setting.

Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

18

Image 18
Contents Supplied Accessories LC-40D68UTFor connections 10P03-MX-NMImportant Information Additional Safety Information Dear Sharp CustomerPrecautions when transporting the TV Caring for the CabinetChild Safety Caring for the Liquid Crystal panelAttaching/Detaching the Stand Setting the TV on the WallUsing an optional bracket to mount the TV Hanging on the wallInsert the batteries into the remote control unit. See Using the Remote Control UnitPower indicator on the front of the television lights Green Experiencing HD imagesPreparation Installing Batteries in the Remote Control UnitConnecting Antenna Cable AntennasPart Names TV FrontTV Rear/Side Connecting to External Equipment Connecting an Audio AmplifierConnecting a PC Turning On/Off the Power Initial InstallationWatching TV Direct Button Operation Changing VolumeSleep Timer Changing ChannelsDirect Button Operation MTS/SAP stereo modeDigital broadcasting audio mode ⑨ PCPress Input again or press a/b to select the input source Press InputPress CC Displays channel information being viewed. Press DisplayYou can select the screen size Press View ModeFor PC input mode For 43 programsOn-Screen Display Menu Using the remote controlUsing the control panel of the main unit On-Screen Display Menu OperationOPC Setting Advanced Picture SettingPicture Menu Setup Menu Power Control MenuAudio Menu Position CH SetupPC Setup Input SkipPC Audio Select Audio SetupReset LanguageParental Ctrl Parental Control Setting Canadian English Ratings When setting an individual content-based rating itemOn-Screen Display Menu TV Parental Guidelines RatingOption Menu Software Update Digital Caption SetupFavorite CH Favorite Channel Setting Operation Lock OutDuring the data checking, Checking blinks Press EnterPress Enter to start updating After the screen shown below is displayed, pressTroubleshooting AppendixTroubleshooting Error Message AppendixModel LC-40D68UT Optional AccessorySpecifications Part name Model numberPC Compatibility Chart Secret number isCalling for Service Limited Warranty