Appendix
Problem | Possible Solution |
• No picture | • Is connection to other components correct? Page 11 |
•Is correct input signal source selected after connection? 
Page 24
•Is the correct input selected? 
Page 15
•Is “On” selected in “Audio Only”? 
Page 24
•If the PC image is not displayed, check the following:
-When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor.
-Check the resolution setting on the PC. Is a
Page 30
• Picture quality of HD programs is | • To enjoy HD images from external equipment, you are required to set up HDMI |
poor. | connection or component connection. |
•If the program content is not of HD quality, HD images cannot be displayed. Check that the program you are viewing provides HD images.
•The HD cable/satellite
•The cable/satellite broadcast may not support a signal resolution of 1080p.
•The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and
cracking sound. | contracts according to change in temperature. This does not affect the TV's |
| performance. |
Troubleshooting - Error Message | ||
|
| |
The example of an error message | Possible Solution | |
displayed on a screen | ||
| ||
|
| |
• Failed to receive broadcast. | • Check the antenna cable. Check that the antenna is correctly setup. | |
|
| |
• No broadcast now. | • Check the broadcast time in the program guide. | |
|
| |
Cautions regarding use in high and low temperature environments
•When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
•Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4°F to e140°F (f20°C to e60°C)
28