Experiencing HD images

QUICK REFERENCE

QUICK INSTALLATION TIPS

1Attach your antenna to the back of the television. (See page 9.)

2Connect the AC plug for the television into the AC outlet.

AC outlet

•Place the TV close to the AC outlet, and keep the power plug within reach.

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

3Bundle the cords properly with the cable clamp.

4How to turn on the television for the ﬁ rst time.

A)Press POWER on the television.

POWER

B)The POWER indicator on the front of the television lights GREEN.

POWER indicator

5Insert the batteries into the remote control unit. (See page 9.)

•Speakers cannot be detached from the TV.

•TV angle cannot be adjusted.

An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following:

•Over-the-air broadcasting via HD quality antenna

•HD cable/satellite subscription

•HD compatible external equipment

•For information on updating to HD programming, ask your cable/satellite service provider.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

17´ (5 m)

30º

Remote control sensor

30º 30º

30º

■Cautions regarding the remote control unit

•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

•The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the remote control sensor.

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the television.

If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.