Sharp Explore the Features and Settings of Your LC-40D68UT Television

Page 21

On-Screen Display Menu

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using "Auto Sync.". In some cases, however, manual adjustment is needed to optimize the image.

H-Pos.:Centers the image by moving it to the left or right.

V-Pos.:Centers the image by moving it up or down.

Clock: Adjust when the image fl ickers with vertical stripes.

Phase: Adjust when characters have low contrast or when the image fl ickers.

Audio Setup

You can output digital audio to an AV amplifi er or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital.

For resetting all "Fine Sync." adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

PC Audio Select

Determines whether the AUDIO terminal is used for INPUT 4 (PC-IN) or INPUT 6 (HDMI).

INPUT4 (PC): Select this item when the audio signal is input via the INPUT 4 (PC-IN) terminal using an analog RGB cable (D-sub 15-pin cable or VGA cable).

INPUT6 (HDMI): Select this item when the audio signal is input via the INPUT 6 (HDMI) terminal using a DVI- HDMI conversion cable.

When "PC Audio Select" is set to "INPUT6 (HDMI)", sound will not be produced if you use only an HDMI-certifi ed cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection.

If you want to connect HDMI-compatible equipment using only an HDMI-certifi ed cable, set "PC Audio Select" to "INPUT4 (PC)".

Language

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1"Return to factory pre-setting" displays on the screen.

If you have already set the Secret No., input the 4-digit secret number here.

2Select "Yes".

After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

The Channel Setup settings will not be changed.

The Language settings will not be changed.

The Secret number settings will not be changed.

The TV Location settings will not be changed.

HDMI Auto View

To watch an HDMI or PC-IN equipment image, select "INPUT5", "INPUT6" or "INPUT7" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV.

Enable: To use View Mode based on signal recognition, including an HDMI signal.

Disable: No function.

Refer to your external equipment operation manual for the signal type.

When connecting a DVI-HDMI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

21

Image 21
Contents LC-40D68UT Supplied Accessories10P03-MX-NM For connectionsImportant Information Dear Sharp Customer Additional Safety InformationCaring for the Cabinet Precautions when transporting the TVCaring for the Liquid Crystal panel Child SafetyUsing an optional bracket to mount the TV Setting the TV on the WallAttaching/Detaching the Stand Hanging on the wallPower indicator on the front of the television lights Green Using the Remote Control UnitInsert the batteries into the remote control unit. See Experiencing HD imagesConnecting Antenna Cable Installing Batteries in the Remote Control UnitPreparation AntennasPart Names TV FrontTV Rear/Side Connecting to External Equipment Connecting an Audio AmplifierConnecting a PC Turning On/Off the Power Initial InstallationWatching TV Sleep Timer Changing VolumeDirect Button Operation Changing ChannelsDigital broadcasting audio mode MTS/SAP stereo modeDirect Button Operation ⑨ PCPress CC Press InputPress Input again or press a/b to select the input source Displays channel information being viewed. Press DisplayFor PC input mode Press View ModeYou can select the screen size For 43 programsUsing the control panel of the main unit Using the remote controlOn-Screen Display Menu On-Screen Display Menu OperationOPC Setting Advanced Picture SettingPicture Menu Setup Menu Power Control MenuAudio Menu PC Setup CH SetupPosition Input SkipReset Audio SetupPC Audio Select LanguageParental Ctrl Parental Control Setting On-Screen Display Menu TV Parental Guidelines When setting an individual content-based rating itemCanadian English Ratings RatingOption Menu Favorite CH Favorite Channel Setting Digital Caption SetupSoftware Update Operation Lock OutPress Enter to start updating Press EnterDuring the data checking, Checking blinks After the screen shown below is displayed, pressAppendix TroubleshootingAppendix Troubleshooting Error MessageSpecifications Optional AccessoryModel LC-40D68UT Part name Model numberSecret number is PC Compatibility ChartLimited Warranty Calling for Service