Sharp LC-42SV50U, LC-32SV40U, LC-46SV50U Preparation, Antennas, To TV antenna terminal

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

2.A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

F-type connector

75-ohm coaxial cable

Connecting Antenna Cable

•Connect the antenna cable to the TV using one of the methods in the illustration as shown ( 1 , 2 , 3 or 4 ).

1 Cable without a CATV converter

Cable TV lead-In

2 VHF/UHF antenna

75-ohm coaxial cable (round)

3 Combination VHF/UHF antenna

75-ohm coaxial cable (round)

or

300-ohm twin-lead cable (flat)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

300/75-ohm adapter (commercially available)

4 Separate VHF/UHF antenna

VHF	UHF		300-ohm
ANTENNA	ANTENNA
			twin-lead cable
		300-ohm twin-lead cable
or		75-ohm coaxial cable

IN OUT

Combiner (commercially available)

To TV antenna terminal

11