Sharp LC-32SV40U, LC-42SV50U, LC-46SV50U Appendix, Troubleshooting, Problem Possible Solution

Appendix

Troubleshooting

Problem	Possible Solution
	Check if you pressed POWER on the remote control unit.
	(See page 21.) If the indicator on the TV is still red,
No power	press POWER on the TV.

Is the AC cord disconnected? (See page 9.)

	Has the power been turned on? (See page 21.)
	External influences such as lightning, static electricity, may
Unit cannot be	cause improper operation. In this case, operate the unit after
operated.	first turning off the power of the TV or unplugging the AC cord
	and re-plugging it after 1 or 2 minutes.
	Are batteries inserted with polarity ( ,	) aligned?
	(See page 12.)
Remote control unit	Are batteries worn out? (Replace with new batteries.)
does not operate.	Are you using it under strong or fluorescent lighting?
	Is a fluorescent light illuminated near the remote control
	sensor?
Picture is cut off/with	Are screen mode adjustments such as picture size made
sidebar screen.	correctly? (See page 25.)
Strange color,	Adjust the picture tone. (See page 29.)
light color, or color	Is the room too bright? The picture may look dark in a room
misalignment	that is too bright.
Power is suddenly	Is the sleep timer set? (See page 23.)
	The unit’s internal temperature has increased. Remove any
turned off.
	objects blocking vent.
No picture	Is connection to other components correct? (See page 16.)
	Is the correct input selected? (See page 16.)
No sound	Is the volume too low? (See page 23.)
	Have you pressed MUTE on the remote control unit?
	(See page 23.)
The TV sometimes	This is not a malfunction. This happens when the cabinet
makes a cracking	slightly expands and contracts according to change in
sound.	temperature. This does not affect the TV’s performance.

Cautions regarding use in high and low temperature environments

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: -4°F to +140°F (-20°C to +60°C)

40