Sharp LC-32AX3X, LC-37AX3X operation manual Setting the TV on the wall, Removing the stand, Example

Page 11

Preparation

Setting the TV on the wall

•You can mount the TV on the wall, using the optional AN-37AG2 bracket for LC-32AX3X/LC-37AX3X.

•For details, refer to the instructions supplied with the optional bracket.

CAUTION

•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

<Example>

Hanging on the wall

Wall mount bracket. (See the bracket instructions for details.)

Regarding the angle when mounting the TV on the wall

• The maximum angle to which you can tilt the wall-mounted TV is as follows. Do not tilt it more than the maximum angle.

LC-32AX3X	Up to 10°

LC-37AX3X	Up to 5°

•Tilt the wall-mounted TV slowly when adjusting its angle.

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before attaching/detaching stand

•Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.

•Remove all terminal covers and connected cables.

•Lay the TV down on cushioning (such as a blanket) over a table.

•Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

1

Unfasten the two screws used to secure the cover in place.

NOTE

2

Unfasten the four screws used to secure the stand in place.

3

Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

• To attach the stand, perform the above steps in reverse order.

10

Image 11

Contents LC-32AX3X LC-37AX3X LC-32AX3X LC-37AX3X ContentsTrademarks ContentsDear Sharp customer Important Safety PrecautionsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Inserting the batteries Using the remote control unitPreparation Bundling the cables and closing the terminal cover Setting the TVPreparation Removing the terminal coverProtection against overturning Bottom of the stand using the screw suppliedSimple operations for watching a TV programme Connecting to an antennaConnecting to the power outlet Basic connectionBefore attaching/detaching stand Setting the TV on the wallRemoving the stand ExampleTV/VIDEO button Part namesTV Front Part names TV RearFreeze/Hold Remote control unitPower indicator Turning on the powerTurning off the power Power buttonSimple button operations for changing channels Using Flashback a on the remote control unitUsing CHr/son the remote control unit Using 0 9 on the remote control unitUsing MPX on the remote control unit Using e Mute on the remote control unit Simple button operation for changing volume/soundSleep timer Changing the volumeExample Basic adjustment settingsMenu operation buttons On-Screen DisplayList of menu items to help you with operations Basic adjustment settingsMenu items Auto search Auto installationProgramme setup Fine tuning Basic adjustment settings Manual setting for each channelSearch tuning Programme Setup Manual Adjust menuColour system menu Colour systemPress a/bto select Colour sys., and then press Enter Sort menus Setting the child lockSkipping channels Skip menuErase programme menus Basic adjustment settings Erase ProgrammePress a/bto select OPC, and then press AV mode selectionOPC Optical Picture Control setting Press c/dto select PictureSelected item Cbutton Dbutton Backlight Picture adjustmentsAdjustments items Black Colour temperatureAdvanced 3D-Y/CSetting Audio adjustmentBasic adjustment settings Monochrome Film modeUsing Surround on the menu screen Power controlBasic adjustment settings Surround Using Surround on the remote control unitResetting the password Useful adjustment settingsPassword setting for child lock for TV input mode Setting a passwordRepeat the above until the name is fully spelt Useful adjustment settingsInput Label Image positionPress c/dto select On or Off, and then press Enter Wide Screen Signalling WSSWSS signal 43 screen Mode Normal Picture aspect ratioAuto Selection Wide modeManual Selection Press a/bto select the desired mode, Language setting for on-screen displayRotate DNR Digital Noise Reduction Hdmi SetupAudio Only Selecting input source Selecting input signal typeInput Select Quick ShootDemo Colour system settingTeletext language setting Useful featuresTeletext function Subpage screen Useful features Displaying SubtitleDisplaying Subpages Time displayDisplaying an external equipment image Using external equipmentConnecting a VCR For INPUT1 signalGame console/Camcorder Using external equipment Connecting a DVD playerConnecting a game console or camcorder DVD playerHdtv tuner Using external equipment Connecting an Hdtv tunerAppendix TroubleshootingProblem Possible Solution Model SpecificationsOptional accessory AppendixLC-32AX3X, LC-37AX3X Dimensional drawingsHOW to SET the Factory Presets 1300 135 Do not Return this Document to Sharp