Sharp LC-37AX3X Simple button operation for changing volume/sound, Sleep timer, Still image

Watching TV

Simple button operation for changing volume/sound

Changing the volume

You can change the volume on the TV or on the remote control unit.

•To increase the volume, press VOLk.

•To decrease the volume, press VOLl.

20

NOTE

•“TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” modes can store volume adjustment values separately.

Using e (Mute) on the remote control unit

emutes the current sound output.

1Press e.

•The sound is silenced.

•“M” has been displayed on the screen for 30 minutes.

Mute

NOTE

•Within 30 minutes after pressing e, press one of the

buttons below to cancel the mute.

—VOLf/VOLe

—e

•Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume

level will be set to 0 automatically. Increase the volume level by pressing VOLk.

2 Press e again within 30 minutes to cancel the mute.

•Before 30 minutes, the volume level returns to the previous setting.

Sleep timer

Allows you to set a time when the TV automatically switches to standby.

1	Press SLEEP.
	• Remaining time displays when sleep timer has
	been set.
		Sleep Timer: Remain 2 hr. 00 min.
2
	Each time you press SLEEP, the remaining
	time switches as shown below.
	0 hr. 30 min.		1 hr. 00 min.	1 hr. 30 min.
		Off	2 hr. 30 min.	2 hr. 00 min.

NOTE

•When the time has been set, countdown automatically starts.

•Five minutes before the preset of time expires, the remaining time displays each minute.

•Select “Off” by pressing SLEEP to cancel the sleep timer.

Still image

You can freeze a motion picture on the screen.

1	Press 3.
2	Press 3 again to exit still image.

NOTE

•When this function is not available, “No still image display available.” will display.

•The still image automatically goes out after 30 minutes.

•When you freeze the picture, an icon is displayed at the lower left corner of the screen.

17