Sharp LC-37AX3X, LC-32AX3X operation manual Colour system setting, Demo

Useful adjustment settings

Colour system setting

You can change the colour system to one that is compatible with the image on the screen.

1 Press MENU and the MENU screen displays.

2	Press c/dto select “Option”.
3	Press a/b to select “Colour System”, and
	then press ENTER.
4	Press a/b to select a compatible video
	signal system of your equipment, and then
	press ENTER.
		AUTO
		PAL
		SECAM
		NTSC 3.58
		NTSC 4.43
		PAL-60

NOTE

•Factory preset value is “AUTO”.

•If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

Demo

Demo shows some of the functions of the TV on the screen.

The demonstration items are as follows.

•Setting Demo to “On” or “Off”.

•Selecting input source to use for Demo. (Demo, Skip [TV, INPUT1, INPUT2, INPUT3, INPUT4])

•Selecting Freeze setting for Demo. (On/Off)

•Selecting Menu setting for Demo. (On/Off)

•Selecting Interval setting for Demo. (10 Sec., 15 Sec., 30 Sec.)

NOTE

•The demo show can be activated from the option menu. After switching on this demo function, it takes 70 seconds approximately, before the TV-set starts the demo show. The selected functions are shown in a self-repeating sequence. Return to normal television-mode is possible only by deactivating the demo-function.

37