Sharp LC-37AX3X, LC-32AX3X operation manual Input Label, Image position, Useful adjustment settings

Useful adjustment settings

Input Label

You can assign each input source a label you like.

1	Press TV/VIDEO to select the desired input
	source.
2	Press MENU and the MENU screen displays.
3	Press c/dto select “Setup”.
4	Press a/bto select “Input Label”, and then
	press ENTER.
5	Press a/b/c/d to select each character
	of the new name for the input source, and
	then press ENTER.
					DVD
		A	B	C	D	E	F	G	H	I	J CLEAR
		K L M N O P						Q	R	S	T BACK
		U V W X Y Z						+	– .		_
		0	1	2	3	4	5	6	7	8	9 END
						(Example)
6	Repeat the above until the name is fully spelt
	out, and then press ENTER.

•The name can be 6 characters or less.

•When you want to set an input source name of less than 6 characters, select “END”, then press ENTER to exit from the labelling menu.

INPUT SOURCE

TV

INPUT1

INPUT2

DVD

INPUT4

(Example)

NOTE

• You cannot change labels if the INPUT SOURCE is TV.

Image position

For adjusting a picture’s horizontal and vertical position.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

3 Press a/b to select “Position”, and then press ENTER.

4 Press a/bto select “H-Pos.” or “V-Pos.”.

H-Pos.	[0]	–10	+10
V-Pos.	[0]	–20	+20
Reset

5 Press c/dto adjust the item to your desired position.

Selected item	Description
H-Pos.	Centres the image by moving it to the left or right.
V-Pos.	Centres the image by moving it up or down.

NOTE

•For resetting all adjustment items to the factory preset values, press a/bto select “Reset”, and then press ENTER.

•Adjustments are stored separately according to input source.

31