Sharp LC-46PX5X operation manual Advanced, Colour temperature, S. Colour Management System, 3D-Y/C

Basic adjustment settings

Advanced Colour temperature

Advanced setting enables you to set the picture adjustment in more detail. There are four options you can choose from.

C.M.S. (Colour Management System)

Colour tone is managed using the six-colour adjustment setting.

1Press MENU and the MENU screen displays.

2Press c/d to select “Picture”.

3Press a/b to select “Advanced”, and then press ENTER.

4Press a/b to select a specifi c adjustment item among “C.M.S.-Hue”, “C.M.S.-Saturation” and “C.M.S.-Value”, and then press ENTER.

Adjusts the colour temperature to give the best white image.

1Repeat steps 1 to 3 in C.M.S. (Colour Management System).

2Press a/b to select “Colour Temp.”, and then press ENTER.

3Press a/b to select the desired level, and then press ENTER.

Selected item	Description
High	White with bluish tone
Mid-High
Middle
Mid-Low
Low	White with reddish tone

3D-Y/C

C. M. S. – Hue

C. M. S. – Saturation

C. M. S. – Value

Colour Temp.

3D - Y/C

Film Mode

R	[	0]	–	+
Y	[	0]	–	+
G	[	0]	–	+
C	[	0]	–	+
B	[	0]	–	+
M	[ 0]		–	+

Reset

Provides high quality images with minimal dot crawl and cross colour noise.

1Repeat steps 1 to 3 in C.M.S. (Colour Management System).

2	Press a/b to select “3D-Y/C”, and then press
	ENTER.

5Press c/d to adjust the item to your desired position.

NOTE

•For resetting all adjustment items to factory preset values, press a/b to select “Reset”, and then press ENTER.

Selected item	Description
C.M.S-Hue	This is a standard to adjust the colour
	either more reddish or more bluish in tone.
C.M.S-	Increases or decreases the saturation of a
Saturation	selected colour.
C.M.S-Value	A higher value makes the image brighter.
	A lower value makes the image darker.

C. M. S. – Hue
C. M. S. – Saturation	Standard
C. M. S. – Value
	Fast
Colour Temp.
	Slow
3D – Y/C
Film Mode

3Press a/b to select the desired level, and then press ENTER.

Selected item	Description
Standard	Normal adjustment
Fast	For movie image
Slow	For still image

NOTE

•3D-Y/C is not selectable depending on the input signal type.

•3D-Y/C may not operate depending on the input signal type or noisy input signal.

24

PX5X_EN.indb 24

2007-5-9 11:43:19