Sharp LC-46PX5X operation manual Fine Sync. adjustment PC input mode only, Phase

Page 38

Useful adjustment settings

Auto Sync. adjustment (PC input mode only)

For automatically adjusting the PC image.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

3Press a/b to select “PC Setup”, and then press ENTER.

4Press a/b to select “Auto Sync.”, and then press ENTER.

Fine Sync. adjustment (PC input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

3Press a/b to select “PC Setup”, and then press ENTER.

5Press a/b to select “Yes”, and then press

ENTER.

• Auto Sync. starts.

NOTE

•Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

4

Press a/b to select a specifi c adjustment

item among “H-Position”, “V-Position”, “Clock”

 

 

and “Phase”.

 

 

Input Signal

 

 

 

Auto Sync.

 

 

 

H-Position

[90]

+

 

V-Position

[60]

+

 

Clock

[90]

+

 

Phase

[ 8]

+

 

Reset

 

 

Selected item

 

Description

H-Position

Centres the image by moving it to the left

 

or right.

 

 

V-Position

Centres the image by moving it to the up

 

or down.

 

 

Clock

Adjusts when the image fl ickers with

 

vertical stripes.

 

 

Phase

Adjusts when characters have low contrast

 

or when the image fl ickers.

5Press c/d to adjust the item to your desired position.

NOTE

•For resetting all adjustment items to factory preset values, press a/b to select “Reset”, and then press ENTER.

•Images may not be displayed properly depending on the settings and/or input signals.

PX5X_EN.indb 37

37

2007-5-9 11:43:23

Page 37 Page 39
Image 38
Page 37 Page 39
Contents
LC-46PX5X Contents Dear Sharp customerContents TrademarksImportant Safety Precautions Precautions when transporting the TVSupplied accessories Inserting the batteries Using the remote control unitPreparation Confi rm the 10 screws supplied with the TV Attaching the standPreparation Short screws g6Insert the cable clamp in the hole on the TV as shown Setting the TVBundling the cables TV rear viewBasic connection Connecting to an antennaConnecting to the AC outlet Simple operations for watching a TV programmeRemoving the stand Setting the TV on the wallAbout setting the TV angle and height adjustment Example Hanging on the wallTV/VIDEO button Part namesTV Front TV Rear Part namesRemote control unit Watching TV Turning on the powerTurning off the power Simple button operations for changing channelsWatching TV Using Flashback a on the remote control unitUsing MPX on the remote control unit Using Mute e on the remote control unit Switches to standbyChanging the volume Still imageOn-Screen Display Basic adjustment settingsMenu operation buttons Basic adjustment settings TV/AV input mode menu itemsPC input mode menu items List of TV/AV menu items to help you with operationsAuto search Auto installation Programme setupIf you have already set the password, enter it here Press a/b to select Yes, and then pressSearch tuning Basic adjustment settings Manual setting for each channelFine tuning Colour systemSound system Broadcasting system Skipping channelsPress a/b to select Label, and then press Basic adjustment settings LabelErase Programme Erase programme menusAV mode selection OPC Optical Picture Control settingPicture adjustments Adjustments itemsAdvanced Colour temperatureS-Hue This is a standard to adjust the colour S. Colour Management SystemBasic adjustment settings Film mode Using Surround on the menu screen Audio adjustmentUsing Surround on the remote control unit SurroundSetting a password Useful adjustment settingsPassword setting for child lock for TV input mode Setting a channelInput Label Useful adjustment settingsAdjustments are stored separately according to input source Image positionPicture aspect ratio Wide Screen Signalling WSSWSS signal 43 screen Mode Panorama Press a/b to select On or Off, and then press EnterManual Selection Wide mode for TV/AV input modeMode menu Auto SelectionYou can select the screen size Wide mode for PC input modeInput Signal Normal Full Press Wide or a/ b to select a desired itemLanguage setting for on-screen display Input Select Audio OnlyDNR Digital Noise Reduction Colour system setting Blue ScreenPower Control for PC source Power ControlPower Control for AV source Selectable Description Items PC SetupInput Signal PC input mode only Phase Fine Sync. adjustment PC input mode onlyPress a/ b to select a specifi c adjustment Dual screen Useful featuresDual screen functions Picture and still imageTeletext language setting Useful featuresTeletext function You can display several subtitles as they are transmitted Select the desired subpage by using c/dDisplaying Subtitle Displaying SubpagesSetting is stored and can be selected Using external equipmentConnecting a VCR Displaying an external equipment imageUsing external equipment Connecting a DVD playerConnecting a game console or camcorder DVD playerConnecting a Digital TV STB Set Top Box Digital TV STBViewing an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connector Displaying an image from a PCProblem Possible Solution TroubleshootingPC compatibility chart Resolution Horizontal VerticalAppendix Communication procedureRS-232C port specifications PC Control of the TVCommands Response code formatModel Optional accessorySpecifications Part name Model numberDimensional drawings Password MemoMemo Cover2PX5X.indd 2007-5-23 Cover2PX5X.indd 2007-5-23 Printed on post-consumer recycled paper