Sharp LC-46PX5X operation manual Power Control for AV source, Power Control for PC source

Page 36

Useful adjustment settings

Power Control

Power Control setting allows you to save energy.

Power Control for AV source

No Signal Off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

• Power control menu displays.

3Press a/b to select “Power Control”, and then press ENTER.

4Press a/b to select “No Signal Off”, and then press ENTER.

5Press a/b to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

•“Disable” is factory preset value.

•When a TV programme fi nishes, and the TV receives signal input, this function may not operate.

No Operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

• Power control menu displays.

3Press a/b to select “Power Control”, and then press ENTER.

4Press a/b to select “No Operation Off”, and then press ENTER.

5Press a/b to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

Power Control for PC source

Power Management

When set, the power will automatically shut down if no signal is input for a certain time.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

• Power control menu displays.

3Press a/b to select “Power Control”, and then press ENTER.

4Press a/b to select “Power Management”, and then press ENTER.

5Press a/b to select “Mode1” or “Mode2”, and then press ENTER.

Off

Mode1

Mode2

Selected item

Description

 

 

Off

• No power management

 

• Factory preset value.

 

 

Mode1

• If no signal inputs for approximately 8

 

minutes, the power shuts down.

 

• Even if you start using the PC and the

 

signal inputs again, the TV stays off.

 

• The TV turns on again by pressing

 

POWER. (See page 13.)

 

 

Mode2

• If no signal inputs for approximately 8

 

seconds, the power shuts down.

 

• When you start using the PC and the

 

signal inputs again, the TV turns on.

 

• The TV turns on again by pressing

 

POWER. (See page 13.)

 

 

NOTE

•If you turn off the power by disconnecting AC cord when setting “Mode2” in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit.

•Pressing POWER on the display will have the same result.

PX5X_EN.indb 35

35

2007-5-9 11:43:23

Page 35 Page 37
Image 36
Page 35 Page 37
Contents LC-46PX5X Contents Dear Sharp customerContents TrademarksImportant Safety Precautions Precautions when transporting the TVSupplied accessories Using the remote control unit PreparationInserting the batteries Attaching the stand PreparationConfi rm the 10 screws supplied with the TV Short screws g6Setting the TV Bundling the cablesInsert the cable clamp in the hole on the TV as shown TV rear viewConnecting to an antenna Connecting to the AC outletBasic connection Simple operations for watching a TV programmeSetting the TV on the wall About setting the TV angle and height adjustmentRemoving the stand Example Hanging on the wallPart names TV FrontTV/VIDEO button TV Rear Part namesRemote control unit Turning on the power Turning off the powerWatching TV Simple button operations for changing channelsUsing Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Switches to standby Changing the volumeUsing Mute e on the remote control unit Still imageBasic adjustment settings Menu operation buttonsOn-Screen Display TV/AV input mode menu items PC input mode menu itemsBasic adjustment settings List of TV/AV menu items to help you with operationsAuto installation Programme setup If you have already set the password, enter it hereAuto search Press a/b to select Yes, and then pressBasic adjustment settings Manual setting for each channel Fine tuningSearch tuning Colour systemSound system Broadcasting system Skipping channelsBasic adjustment settings Label Erase ProgrammePress a/b to select Label, and then press Erase programme menusAV mode selection OPC Optical Picture Control settingPicture adjustments Adjustments itemsColour temperature S-Hue This is a standard to adjust the colourAdvanced S. Colour Management SystemBasic adjustment settings Film mode Audio adjustment Using Surround on the remote control unitUsing Surround on the menu screen SurroundUseful adjustment settings Password setting for child lock for TV input modeSetting a password Setting a channelUseful adjustment settings Adjustments are stored separately according to input sourceInput Label Image positionWide Screen Signalling WSS WSS signal 43 screen Mode PanoramaPicture aspect ratio Press a/b to select On or Off, and then press EnterWide mode for TV/AV input mode Mode menuManual Selection Auto SelectionWide mode for PC input mode Input Signal Normal FullYou can select the screen size Press Wide or a/ b to select a desired itemLanguage setting for on-screen display Audio Only DNR Digital Noise ReductionInput Select Colour system setting Blue ScreenPower Control Power Control for AV sourcePower Control for PC source PC Setup Input Signal PC input mode onlySelectable Description Items Fine Sync. adjustment PC input mode only Press a/ b to select a specifi c adjustmentPhase Useful features Dual screen functionsDual screen Picture and still imageTeletext language setting Useful featuresTeletext function Select the desired subpage by using c/d Displaying SubtitleYou can display several subtitles as they are transmitted Displaying SubpagesUsing external equipment Connecting a VCRSetting is stored and can be selected Displaying an external equipment imageConnecting a DVD player Connecting a game console or camcorderUsing external equipment DVD playerConnecting a Digital TV STB Set Top Box Digital TV STBConnecting a PC Signal names for 15-pin mini D-sub connectorViewing an image from a PC Displaying an image from a PCTroubleshooting PC compatibility chartProblem Possible Solution Resolution Horizontal VerticalCommunication procedure RS-232C port specificationsAppendix PC Control of the TVCommands Response code formatOptional accessory SpecificationsModel Part name Model numberDimensional drawings Password MemoMemo Cover2PX5X.indd 2007-5-23 Cover2PX5X.indd 2007-5-23 Printed on post-consumer recycled paper
Top Page Image Contents