Sharp LC-60LE835X Attaching the stand unit 60LE835X, Attaching the stand cover, Insert Holes on

Preparation

	Attaching the stand unit – 60LE835X	5 Attaching the stand cover.
		1 Insert the stand cover.
•	Before performing work, spread cushioning over the surface	2 Insert and tighten two short screws into the holes of
		the stand cover.
	on which you will be laying the TV. This will prevent it from
	being damaged.
CAUTION		Short screws
•	Attach the stand in the correct direction.
•	Be sure to follow the instructions. Incorrect installation
	of the stand may result in the TV falling over.
1 Confirm that there are screws with the stand unit.
	For 60 inch models
	(four long screws, four middle screws and two
	short screws)

2Attach the supporting post for the stand unit onto the base using the long screws with a screwdriver as shown.

	Long screws
	2
Supporting
post	1

3Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area).

Soft cushion

NOTE

•To detach the stand unit, perform the steps in reverse order.

•A screwdriver is not supplied with this product.

4Insert the

holes on

Middle screws

8