Enjoying 3D image viewing
3D setup
E Basic operation
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected.
3D still image effect adjustment
You can adjust the 3D still image effect (depth).
Adjust the level from l5 to +10. “0” is the level where no adjustment is made (factory preset value).
NOTE
•This function can be adjusted when viewing 3D still images in USB media mode.
•If you experience discomfort while viewing 3D images, immediately discontinue viewing.
| Item | |
Yes | When a 3D signal is detected, the TV | |
switches to 3D mode automatically. | ||
| ||
|
| |
No | Automatic change is not performed. | |
|
|
NOTE
•3D signals may not be detected depending on the signal format.
2D s 3D convert effect
You can adjust the 3D effect when converting images from 2D mode to 3D mode. Select a desired level of convert effect from e1 to e16.
NOTE
•This function is only available when converting 2D images to 3D images.
•When you use this function, image conversion on the TV will result in some differences in the original images and how they appear.
•2D images that have been converted to 3D images may be viewed only for personal use.
3D still image effect setting
Select the method for adjusting the 3D still image effect (depth).
Item
Auto | Adjusts the still image effect (depth) | |
automatically. | ||
| ||
|
| |
Manual | Manually adjust the still image effect | |
(depth). | ||
| ||
|
|
Viewing time info
This function allows you to display the elapsed time of 3D image viewing on the screen.
| Item |
Yes | The elapsed time is displayed in one- |
hour increments after you start watching | |
| 3D images. |
|
|
No | Hide the time. |
|
|
3D test
This function displays 3D images for testing the 3D operation. Clicking “Start” on the screen plays back 3D test images.
NOTE
•If you press Bduring playback, the previous screen will be displayed.
3D glasses control
To enable this function, set the location of the TV to “STORE” (Page 15). Selecting “Yes” prevents the 3D glasses from receiving 3D signals from other TVs.
NOTE
•If you selected “Manual”, adjust the 3D still image effect (depth) with “3D still image effect adjustment”.
•This function can be adjusted when viewing 3D still images in USB media mode.
•Even if you selected “Auto”, the 3D still image effect (depth) may not be correctly adjusted depending on the 3D still image.
•3D still images taken in macro mode will be displayed with excessive depth.
•If you experience discomfort while viewing 3D images, immediately discontinue viewing.
67