Basic adjustment, Advanced | Sharp LC-60LE835X manual

Basic adjustment

Picture

Advanced

This TV provides various advanced functions for optimising the picture quality.

Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”.

C.M.S.-hue

This function adjusts the hue of a selected colour using a six-colour adjustment system.

C.M.S.-saturation

This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.

C.M.S.-value

This function adjusts the brightness of a selected colour using a six-colour adjustment system.

Colour gamut range

Adjusts the range of a subset of colour to display the image. Expanded colour gamut means more colourfulness; images become more vivid.

	Item
Standard	Standard colour gamut.

Expanded	More vivid colour with expanded colour gamut.

NOTE

•This function is available only when selecting “MOVIE” or “MOVIE (3D)” from the “AV mode” menu.

Colour temp.

NOTE

•This effect is greater on fast moving images.

•This function will have no effect in the following cases.

1)The type of signal received is a PC signal.

2)An OSD is being displayed.

3)Teletext is activated.

•If images appear blurred, set to “Off”.

Quad pixel plus

Reproduces high-definition images with higher resolution.

Gamma adjustment

Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e 2 to a minimum of f 2.

Film mode

Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality (“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).

NOTE

•Film mode is not selectable depending on the input signal type.

Active contrast

Automatically adjusts the contrast of an image according to the scene.

DNR (Digital Noise Reduction)

“DNR” produces a clearer image (“Auto”, “High”, “Middle”, “Low”, “Off”).

NOTE

Adjusts the colour temperature to give the best white image.

		Item
	High	White with bluish tone.

	Mid-High	Intermediate tone between “High” and
	Mid-High	“Middle”.
		“Middle”.

	Middle	Natural tone.

	Mid-Low	Intermediate tone between “Middle” and
	Mid-Low	“Low”.
		“Low”.

	Low	White with reddish tone.

	10 point setting*	Finely adjusts each colour temperature
	10 point setting*	between 1 to 10 points.
		between 1 to 10 points.

	R/G/B Gain (LO),	Adjusts the white balance by changing the
	R/G/B Gain (HI)	value of each item.

*“10 point setting” is available only when selecting “STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE (3D)” from the “AV mode” menu.

Quick shoot

“Quick shoot” technologies provide superior solutions for digital display picture quality removing motion blur (“200/240Scan”, “Scan”, “High”, “Low”, “Off”).

•This function may not be available depending on the input signal type.

Monochrome

For viewing a video in black & white.

Range of OPC

The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16.

NOTE

•This function is available only when the “OPC” setting is set to “On” or “On:Display”.

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•The maximum and minimum settings cannot be set to the same number.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.