Sharp LC-32DA5U, LC-26DA5U manual Variable, Fixed

Useful adjustment settings

Allows you to select what controls the audio output.

Press MENU and the MENU screen displays.

Press _/_ to select "Option".

Press A/Y to select "Output Select", and then press ENTER.

Press _1/_ to select "Fixed" or "Variable", and then press ENTER.

Allows you to set a time when the TV automatically switches to standby.

FA_E

s &PA6o °E

Press SLEEP.

•Remaining time displays when sleep timer has been set.

I Sleep Timer: Remaining 30 I

	- Sound via speaker is adjusted with VOL
Fixed	+/-	on the remote control		unit or VOL -/
	+	on the	TV.
	- Sound via the MONITOR OUTPUT terminal
	is not adjustable and constantly outputs.
	- Sound via the MONITOR OUTPUT terminal
Variable	is adjusted		with VOL +/-	on the remote
	control unk or VOL -/+ on the TV.

- Sound via speaker is muted.

Use Quick Shoot Operation to view fast-action video more clearly.

Repeat steps 1 and 2 in Output Select.

Press A/Y to select "Quick Shoot", and then press ENTER.

Press _1/_ to select "On", and then press

ENTER.

®Quick Shoot may cause image noise. If this occurs turn the function "Off".

Select the optimum color systems to receive. (AUTO, NTSC, PAL-M, PAL-N)

Repeat steps 1 and 2 in Output Select.

Press ,&/T to select "Color System", and then press ENTER.

Press A/_' to select a compatible video signal system of your equipment, and then press ENTER.

Each time you press SLEEP, the remaining time switches as shown below.

When set, the time automatically starts counting down.

,,If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.

Fiveminutes before time expires, the remaining time displays each minute.

I Sleep	Timer:	Off ]
ISleep	Timer:	30	]
I Sleep	Timer:	60	]
ISleep	Timer:	90	]
I Sleep	Timer:	120	m

®Select "Off" by pressing SLEEP to cancel the sleep timer.

®The TV will enter the standby mode when the remaining time reaches zero.

Q "33