Watching TV
You can change channels in several ways.
(Z)
NNPUT FLASHBACK
0
VOL OH
FREEZEMENU
Od O
G®9
e6z
[] Using CHA/V on the remote control unit o Press CHA to increase the channel number.
o Press CH v to decrease the channel number.
®CH V/A on the TV operates the same as CHA/V on the remote control unit.
CH V/A
[] Changing channels with OH A/V on the
remote control unit or CH VIA on theTV
Air: Press CH /_ and the channel change in the order shown below:
2_3_..._68_69_2_3...
Press CH V and the channel change in the order shown below:
3_2_69_68_..._3_2...
Cable: Press CH A and the channel change in the order shown below:
1_2_3_..._125_1 _2_3...
Press OH V and the channel change in the order shown below:
3_2_ 1_125_..._3_2_1_...
[] Using 0 - 9 on the remote control unit Select the channels directly by pressing buttons 0 to 9.
,,The TV allows you to select up to 125 channels (1
to 125). To select a channel, enter a 2 or
To select a 1 or
Complete the following steps within 3 seconds.
Press the 0 button.
•Complete the step 2 within 3 seconds after the step 1.
Press the 5 button.
%_050
Press ENT to enter the setting.
,,Channel selection will be made if there is no operations for 3 seconds.
®When selecting a
To select a
Complete the following steps within 3 seconds.
Press the 1 button.
Complete the step 2 within 3 seconds after the step 1.
Press the 1 button again.
Complete the step 3 within 3 seconds after the step 2.
Press the 5 button.
[] Using FLASHBACK on the remote control unit
Press FLASHBACK to switch the currently tuned channel to the previously tuned channel.
Press FLASHBACK again to switch back to the currently tuned channel.
Press FLASHBACK to toggle between the currently selected input source and the previously selected one.
®FLASHBACK will not work if no channel has been changed after the TV is turned on.