Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
o Do not remove the stand from theTV unless using an optional wall mount bracket to mount it.
Before | attaching/detaching |
| stand |
|
| |
o Before | performing | work | make | sure to turn | off the TV, |
|
Before | performing | work | spread | cushioning | over the base area to lay the TV on. This will prevent it from being | |
damaged. |
|
|
|
|
| |
r1 |
|
| 2 |
|
|
|
Unfasten the screw used to Unfasten the four screws secure the bracket in place. used to secure the stand in
place.
*Start from step 2 for the 26 inch model to unfasten the k,, screws. Note that the shape of each stand differs.
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the
base area.) | t |
® To attach the stand, perform the above steps in reverse order.
Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall. Carefully read the instructions that come with the bracket before beginning work.
f
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)
Vertical mountinc | Angular mounting |
Q "45