Miller Electric manual Specifications, IH/TS Installation, Specification Description

		SECTION 4 − INSTALLATION
4-1.	Specifications
	Specification	Description
Overall Dimensions		Height: 10 in (254 mm); Width: 14-1/2 in (368 mm); Depth: 16 in (406 mm)
Weight		Net: IH/TS (no recorder) 13.1 lb (5.9 kg); IH/TS (digital recorder) 21.1 lb (9.6 kg)
Type Of Input Power		24 Volts DC, 115 Volts AC
Memory Capacity		One Program Up To 8 Segments
Control Capacity		Single Power Source Control
Operating Temperature Range		41° To 104° F (5° To 40° C)
Storage Temperature Range		−4° To 122° F (−20° To 50° C)
Reference the controller and recorder manuals for additional information.
4-2.	IH/TS Installation
			Y Turn Off and		disconnect
				input power.
			5 kW System
		1	1.	Temperature
				Control/Recorder
	1		2.	5kW Mounting Bracket
		8	3.	Screw, 10-32 (4)
			Install and secure IH/TS to mount-
			ing bracket using supplied #10
4		8	screws.
			4.	5kW Power Source Case
		7	5. Case Sheet Metal Screw (4)
			Remove case sheet metal screws
		2	from both top left and right sides of
			unit. Install mounting bracket to
		6
			power source and secure by rein-
		5	stalling sheet metal screws.
			25 kW System
			6. 25 kW Power Source Case
			7.	Rear Mounting Bracket
			8.	Screw, 1/4-20 (2)
			Remove front and middle mounting
		3	screws from top of Item 6 case. Lo-
		4	cate IH/TS and reinstall			front
			mounting screws.		Locate	rear
			mounting bracket, and secure with
			supplied 1/4-20 screws. Reinstall
			middle mounting screws to secure
			bracket to case.

Tools Needed:

3/8, 5/16 in

Ref. 802 905-A / 802 900

OM-203 185 Page 8