Miller Electric TS, IH Connecting To Power Source, Input 14 Pin Information For Receptacle RC1

4-3. Connecting To Power Source

5

I J K AB

H N L C

G M D

F E

1

6

3

2

Turn Off power source.

1. IH/TS

2. Interconnecting Cord

3. 14-Socket Plug

4. 14-Pin Plug

Obtain cord with 14-socket plug on one end and 14-pin plug on other end.

5. Keyway

6. Remote 14 Receptacle RC1 (See Section 4-4)

To connect cord to a receptacle, align keyway, insert plug, and tighten threaded collar.

To connect remaining end of cord to power source, align keyway, insert plug, and tighten threaded collar.

4

sb7.1* 3/93 - Ref. S-0004-A / S-0750 / Ref. 802 926 / Ref. 801 049 / 801 825-B / Ref. 803 004-A

4-4. Input 14 Pin Information For Receptacle RC1

REMOTE 14	Pin	Pin Information
Remote Contactor	A	+24 volts dc from power source.
	B	Contact closure to A completes power source +24 volts dc contactor control circuit.
Remote Output Control	D	Control circuit common.
	E	0 to +10 volts dc signal for power source output control.
Power Source Fault	F, J	Absence of contact closure from power source indicates power source output failure.
	I	Actual frequency input signal.
Remote Metering*	L	Average power input signal.
	M	Voltage input signal RMS.
	N	Current input signal RMS.

*See power source Owner’s Manual for scaling information.

OM-203 185 Page 9