6-3-6. Viewing Data In Review Software
6-3-6-1. Installing Review Software And First Time Setup
Insert the “Chessell 5000 Series Data Management System” CD into the computer.
If the installation program does not automatically start, browse to the CD using “My Computer” and run “Setup.exe”.
Place a check in the box next to “Review”. The other components are optional. Additional information about the software can be found in the readme.txt file on the CD.
Click “Install Recorders Software” and accept the default settings of the software installation.
This Owner’s Manual will guide you through the steps to create and save a chart for a batch file. Additional informa- tion on the Review software is available under Start\Programs\Eurotherm\Manuals\Review Manual.
The first time Review software is launched, a message box will be displayed to enable “Review Full features”. Place a check in the box for “Don’t ask me this again”, then click “No”.
“Review” software first time setup screen.
scrn35
6-3-6-2. Backing Up The Database
When Review software is used, archive data is stored in a database on the PC. As files are transferred to the data- base, the “Review.erv” file size increases. Data transferred into the database can be deleted, but not moved. If the “Review.erv” file size reaches 1 gigabyte, data will need to be deleted or a new database will need to be created. Refer to the Review Manual for additional instructions.
When data is transferred to the review.erv database, the original.uhh data file is simultaneously copied to the Master Archive Folder.
To change the location of the Master Archive Folder, proceed as follows: In Review software, click “Options”.
Click “Master Archive Folder”.
Change the “Master Archive Folder” location as desired. If a network drive is available, multiple users can use the same database. Refer to the Review Manual for further instructions.
Screens for changing the “Master
Archive Folder” location.
scrn36 / scm37
