Miller Electric IH, TS manual Connecting External Device

4-7. Connecting External Device

1

6

5

The IH/TS must have (as a minimum) one thermocouple connected to receptacle TC1. If multiple thermocouples are desired, either use individual thermocouple plugs or the thermocouple extension cable.

To connect thermocouples to the control, proceed as follows:

Turn Off power source.

1.Temperature Controller

2.Thermocouple Receptacles

3.Individual Thermocouple Plug

4.Thermocouple Extension Cable

Align plug pins with receptacle sockets and push plug into receptacle.

2			5. Coolant Line From Coil
			6. Coolant Line To Cooler
			“Coolant In” Port
			The IH/TS is supplied with an
			internal coolant flow switch.
		4	Coolant hoses must be connected
			to the IH/TS for proper operation.
			Connect coolant hoses (supplied
	3		with post-heat systems) to coolant
			fittings on unit as described in
			Section 4-5.

Tools Needed:

11/16 in

Ref. 803 003-B

OM-203 185 Page 12