Analogue setting, Sort, Erase programme

Basic adjustment

Analogue setting	Sound sys.	E Sort
		Channel positions can be sorted freely.
You can reconfigure the analogue TV channels
	Select the optimum sound systems (broadcasting	1	Press c/dto select “Yes”, and then press ;.
settings automatically or manually.	systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).	2	Press a/b/c/dto select the channel you
E Additional search
	Label		want to move, and then press ;.
Use this menu to add new services automatically		3	Press a/b/c/dto move it to the desired

after “Analogue search” in the “Auto installation”	When a TV channel sends its network name, the		position, and then press ;.
menu has been completed.		4	Repeat steps 2 and 3 until all desired channels
	“Auto installation” detects the information and
• Start searching channels after selecting the colour
	assigns a name to it. However, you can change		are sorted.
system and sound system.
	channel names individually.	E Erase programme
E Manual adjust
	Select each character of the new name for the	Channels can be erased individually.
Use this menu to set up analogue TV channels
	channel with using the software keyboard (Page 13).	1	Press c/dto select “Yes”, and then press ;.
manually.
	NOTE
After selecting “Yes” on the screen, press		2	Press a/b/c/dto select the channel you
	• The name can be five characters or less.
a/b/c/dto select the channel you want to			want to erase, and then press ;.

set and then press ;.	Skip	3	• A message window pops up.
Fine			Press c/dto select “Yes”, and then press
	Channels with “Skip” set to “On” are passed over		;to erase the selected channel. All the
You can adjust the frequency to the desired position.	when using :r/s even if selected while watching		subsequent channels move up.
	the image from the TV.	4	Repeat steps 2 and 3 until all desired channels
NOTE
	Lock		are erased.
• Adjust while checking the background picture as a

reference.	You can block the viewing of any channel.
• You can set by directly entering the frequency number
of the channel with 0_9 numeric buttons.	NOTE
EXAMPLE
	• See “PIN” for setting a PIN.
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.	• When “Lock” is set to “On” for a channel, “Child lock
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.	has been activated” displays, and the image and sound
Colour sys.	of the channel are blocked.
	• When pressing 6 while “Child lock has been activated”
Select the optimum colour system to receive	displays, the PIN input window will display. Inputting
	the correct PIN unlocks the “PIN” temporarily until the
(“Auto”, “PAL”, “SECAM”).	power is turned off.

Analogue setting

E Sort

E Additional search

Label

E Erase programme

Fine

Lock

EXAMPLE

Colour sys.

Select the optimum colour system to receive